Question 6.7: Calculate the component short-circuit currents at the instan......

Calculate the component short-circuit currents at the instant of three-phase terminal short circuit of the generator (particulars as shown in Table 6.1). Assume that phase a is aligned with the field at the instant of short circuit, maximum asymmetry, i.e., δ = 0. The generator is operating at no load prior to short circuit.

TABLE 6.1
Generator Data
Description Symbol Data
Generator
112.1 MVA, 2-pole, 13.8 kV, 0.85 PF, 95.285 MW, 4690 A, 0.56 SCR, 235 field V, wye connected
Per unit reactance data, direct axis
Saturated synchronous X_{dv} 1.949
Unsaturated synchronous X_{d} 1.949
Saturated transient X_{dv}^{\prime} 0.207
Unsaturated transient X_{d}^{\prime} 0.278
Saturated subtransient X_{dv}^{\prime \prime} 0.164
Unsaturated subtransient X_{d}^{\prime \prime} 0.193
Saturated negative sequence X_{2v} 0.137
Unsaturated negative sequence X_{2I} 0.185
Saturated zero sequence X_{0v} 0.092
Leakage reactance, overexcited X_{0I} 0.111
Leakage reactance, underexcited X_{LM,OXE}
X_{LM,UXE}
0.164
0.164
Per unit reactance data, quadrature axis
Saturated synchronous X_{qv} 1.858
Unsaturated synchronous X_{q} 1.858
Unsaturated transient X_{q}^{\prime} 0.434
Saturated subtransient X_{qv}^{\prime \prime} 0.140
Unsaturated subtransient X_{q}^{\prime \prime} 0.192
Field time constant data, direct axis
Open circuit T_{d0}^{\prime} 5.615
Three-phase short-circuit transient T_{d3}^{\prime} 0.597
Line-to-line short-circuit transient T_{d2}^{\prime} 0.927
Line-to-neutral short-circuit transient T_{d1}^{\prime} 1.124
Short-circuit subtransient T_{d}^{\prime \prime} 0.015
Open circuit subtransient T_{d0}^{\prime \prime} 0.022
Field time constant data quadrature axis
Open circuit T_{q0}^{\prime} 0.451
Three-phase short-circuit transient T_{q}^{\prime} 0.451
Short-circuit subtransient T_{q}^{\prime \prime} 0.015
Open circuit subtransient T_{q0}^{\prime \prime} 0.046
Armature dc component time constant data
Three-phase short circuit T_{a3} 0.330
Line-to-line short circuit T_{a2} 0.330
Line-to-neutral short circuit T_{a1} 0.294
Step-by-Step
The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.

The calculations are performed by substituting the required numerical data from Table 6.1 into (6.113):
i_{a} = \sqrt{2} E [(\frac{1}{X_{d}}) \sin (ωt+δ)+(\frac{1}{X^{\prime}_{d}}-\frac{1}{X_{d}})e^{-t/T^{\prime}_{d}} \sin (ωt+δ) + (\frac{1}{X^{\prime \prime}_{d}}-\frac{1}{X_{d}^{\prime}})e^{-t/T^{\prime \prime}_{d}} \sin (ωt+δ) – \frac{(X^{\prime \prime}_{d} \ + \ X^{\prime \prime}_{q})}{2X^{\prime \prime}_{d}X^{\prime \prime}_{q}}e^{-t/T_{a}} \sin δ – \frac{(X^{\prime \prime}_{d} \ – \ X^{\prime \prime}_{q})}{2X^{\prime \prime}_{d}X^{\prime \prime}_{q}}e^{-t/T_{a}} \sin (2ωt+δ)]      (6.113)
Steady-state current = 2.41 kA rms
Decaying transient current = 20.24 kA rms
Decaying subtransient current = 5.95 kA rms
Decaying DC component = 43.95 kA
Decaying second-harmonic component = 2.35 kA rms
Note that the second-harmonic component is zero if the direct axis and quadrature axis subtransient reactances are equal. Also, the dc component in this case is 40.44 kA.

Related Answered Questions

Question: 6.4

Verified Answer:

In the steady state, all the currents and flux lin...
Question: 6.8

Verified Answer:

Applying the equations in Section 6.9.1: L_...