Holooly Transparent Logo 2023
Holooly Transparent Logo 2023

Q. 18.8

Chapter 18

Q. 18.8

If the current source of Fig. 18-28 has R = 10 kΩ, v_{in} = 1 \ V, and V_{CC} = 15 \ V, what is the output current? What is the maximum load resistance that can be used with this circuit if v_{in} can be as large as 10 V?

18-28
The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

Question: 18.1

One application for Fig. 18-6 is in a squelch circuit. This kind of circuit is used in communication receivers to reduce listener fatigue by having a low voltage gain when no signal is being received. This way, the user does not have to listen to static when there is no communication signal. ...

Question: 18.2

When we need to vary the amplitude of an out-of-phase signal, we can use a circuit like the one in Fig. 18-10. If R1 = 1.2 kΩ and R2 = 91 kΩ, what are the values of the maximum and minimum voltage gain? ...

Question: 18.3

If R = 1.5 kΩ and nR = 7.5 kΩ in Fig. 18-12, what is the maximum positive voltage gain? What is the value of the other fixed resistance? ...

Question: 18.4

In Fig. 18-18, R1 = 1 kΩ, R2 = 100 kΩ, and R = 10 kΩ. What is the differential voltage gain of the instrumentation amplifier? What is the common-mode voltage gain if the resistor tolerances in the second stage are ±0.01 percent? If vin = 10 mV and vin(CM) = 10 V, ...

Question: 18.10

If rds varies from 50 Ω to 120 kΩ in Fig. 18-32, what is the maximum voltage gain? What is the minimum voltage gain? ...

Question: 18.9

The Howland current source of Fig. 18-31 has R = 15 kΩ, vin = 3 V, and VCC = 15 V. What is the output current? What is the largest load resistance that can be used with this circuit if the maximum input voltage is 9 V? ...

Question: 18.7

In Fig. 18-27, R1 = 1 kΩ and R2 = 51 kΩ. If a 741C is used for the op amp, what is the voltage gain of the circuit? What is the closed-loop output impedance?What is the shorted-load current of the circuit if each transistor has a current gain of 125? ...

Question: 18.6

In Fig. 18-25, D0 = 1, D1 = 0, D2 = 0, and D3 = 1. Using a Vref value of +5 V, determine the decimal equivalent of the binary input (BIN) and the output voltage of the converter. ...

Question: 18.5

In Fig. 18-22, R1 = 1 kΩ, R2 = 2 kΩ, R3 = 3 kΩ, R4 = 4 kΩ, R5 = 5 kΩ, and Rf = 6 kΩ. What is the voltage gain of each channel? ...