Question 15.9: Suppose that we have a 4700-V-rms ac source and we need to d...

Electrical Engineering: Principles and Applications

Suppose that we have a 4700-V-rms ac source and we need to deliver 220 V rms to a load. Determine the turns ratio $N_1/N_2$ of the transformer needed.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 15.10

Consider the source, transformer, and load shown in Figure 15.24. Determine the rms values of the currents and voltages: a. with the switch open; b. with the switch closed. ...

Verified Answer:

Because of the applied source, the primary voltage...

Question: 15.8

Two coils are wound on a toroidal core as illustrated in Figure 15.16. The reluctance of the core is 10^7 (ampere-turns)/Wb. Determine the self inductances and mutual inductance of the coils. Assume that the flux is confined to the core so that all of the flux links both coils. ...

Verified Answer:

The self inductances can be computed using Equatio...

Question: 15.7

Calculation of Inductance Determine the inductance of the 500-turn coil shown in Figure 15.12 and analyzed in Example 15.5. ...

Verified Answer:

In Example 15.5, we found that the reluctance of t...

Question: 15.6

The iron core shown in Figure 15.13(a) has a cross section of 2 cm by 2 cm and a relative permeability of 1000. The coil has 500 turns and carries a current of i = 2 A. Find the flux density in each air gap. ...

Verified Answer:

The magnetic circuit is depicted in Figure 15.13(b...

Question: 15.5

Consider the magnetic core with an air gap as shown in Figure 15.12(a). The core material has a relative permeability of 6000 and a rectangular cross section 2 cm by 3 cm. The coil has 500 turns. Determine the current required to establish a flux density of Bgap = 0.25 T in the air gap. ...

Verified Answer:

As shown in Figure 15.12(b), this magnetic circuit...

Question: 15.4

Using magnetic circuit concepts, analyze the toroidal coil shown in Figure 15.8 to find an expression for the flux. ...

Verified Answer:

As indicated in Figure 15.11, the magnetic circuit...

Question: 15.13

Find the percentage regulation and power efficiency for the transformer of Table 15.1 for a rated load having a lagging power factor of 0.8. ...

Verified Answer:

In this example, we are taking the rms values of c...

Question: 15.12

Consider Figure 15.26(a). Reflect Vs and R1 to the secondary side. ...

Verified Answer:

The voltage is reflected by using the turns ratio....

Question: 15.11

Consider the circuit shown in Figure 15.26(a). Find the phasor currents and voltages. Also, find the power delivered to the load. ...

Verified Answer:

First, we reflect the load impedance

Z_L[/l...

Question: 15.3

Suppose that we have a toroidal core with μr = 5000, R = 10 cm, r = 2 cm, and N = 100. The current is i(t) = 2 sin(200πt) Compute the flux and the flux linkages. Then, use Faraday’s law of induction to determine the voltage induced in the coil. ...

Verified Answer:

First, the permeability of the core material is [l...