Holooly Plus Logo
Holooly Plus Logo

Question 35.PE.MCQ.7: The total response of a control system is (a) Same as steady......

The total response of a control system is

(a) Same as steady-state response

(b) Sum of steady-state response and transient response

(c) Sum of free and forced response

(d) Both (b) and (c) are correct

Step-by-Step
The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.
Report Answer

(d) The total response is equal to the sum of free response and forced response. It is also equal to the sum of steady-state response and transient response.

Related Answered Questions

Question: 35.PE.NAQ.5

For one of the values of gain factor (K) for which the control system with characteristic equation s² + K(s + s) -1 = 0 is stable: 0.1, 0.2, 0.3 and 0.8. ...

Verified Answer:

The characteristic equation can be rewritten as s²...
Question: 35.PE.NAQ.4

The characteristic equation of a given system is s³ + (K + 4)s² + 6s + 12 = 0 . The system would be stable for which one of the following four values of K: −4, −3, −2 and −1. ...

Verified Answer:

The Routh table for this system is \begin{a...
Question: 35.PE.NAQ.3

A control system is characterized by the following differential equation. d²y/dt² + 36y = 36x Determine the damped frequency (in rad/s). ...

Verified Answer:

Comparing the given differential equation with sta...
Question: 35.PE.NAQ.2

In the control system discussed in Question 1, determine the percent overshoot. ...

Verified Answer:

The percentage overshoot is expressed as \b...
Question: 35.PE.NAQ.1

A control system is described by following differential equation: 3d²y/dt² + 6dy /dt + 12y = 12x Determine the system time constant (in sec). ...

Verified Answer:

The given differential equation can be written as ...
Question: 35.PE.MCQ.10

The open-loop DC gain of a unity negative feedback system with closed-loop transfer function (s + 4)/(s²+ 7s + 13) is (a) 4/13 (b) /4/9  (c) 4 (d) 13 ...

Verified Answer:

(b) The closed loop transfer function is \f...
Question: 35.PE.MCQ.9

The transfer function of a tachometer is of the form (a) Ks (b) K/s (c) K/s+1 (d) K/s(s + 1) ...

Verified Answer:

(a) Tachometer is basically a differentiator. Its ...
Question: 35.PE.MCQ.8

In the case of a linear constant coefficient second order control system, the system poles will be real and negative for the following condition of damping ratio `ζ ’  (a) ζ > 1 (b) ζ < 0 (c) ζ ≥ 1 (d) ζ = 1  ...

Verified Answer:

(c) The second-order system is considered by a sec...
Question: 35.PE.MCQ.6

One of the following theorems is applicable to linear control systems. (a) Reciprocity theorem (b) Superposition theorem (c) Compensation theorem (d) Substitution theorem ...

Verified Answer:

(b) According to the superposition principle when ...
Question: 35.PE.MCQ.5

“Laplace transform of the impulse response of a system gives its transfer function.” − Comment on the statement. (a) It is true. (b) This statement is baseless as the transfer function has nothing to do with the impulse response. (c) It is true only under some conditions. (d) None of these. ...

Verified Answer:

(a) It is true because transfer function P(s) is Y...