Holooly Plus Logo
Holooly Plus Logo

Question 10.15: Sketch the Q waveform for the 74LS76 negative edge-triggered......

Sketch the Q waveform for the 74LS76 negative edge-triggered J-K flip-flop shown in Figure 10–46(a), with the input waveforms given in Figure 10–46(b).

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.
Report Answer

Note: Q changes only on the negative edge of {\overline{{C_{p}}}}, except when asynchronous operations are ({\overline{{S}}}_{D},{\overline{{R_{D}}}}) taking place.

Figure 10–46
Loading more images...

Related Answered Questions

Question: 10.21

LPM Flip-Flop with Asynchronous Control Use the LPM_FF to implement an octal D flip-flop with asynchronous clear, set, and load. Include an enable to control the clock. Test its operation by producing a set of simulation waveforms that exercise both the asynchronous and synchronous inputs. ...

Verified Answer:

Insert the LPM_FF symbol to a block design file as...
Question: 10.20

LPM Flip-Flop Use the LPM_FF to implement an octal D flip-flop with synchronous clock and data inputs and an asynchronous clear. Test its operation by producing a set of simulation waveforms that exercise both the synchronous and asynchronous inputs. ...

Verified Answer:

Insert the LPM_FF symbol to a new block design fil...
Question: 10.19

For each of the flip-flops shown in Figure 10–55(a), sketch the Q outputs in Figure 10–55(b). ...

Verified Answer:

Question: 10.18

The 74109 is a positive edge-triggered J-K flip-flop. The logic symbol (Figure 10–49) and input waveforms (Figure 10–50) are given; sketch Q. ...

Verified Answer:

Notes: 1. Positive edge triggering. 2. {\ov...
Question: 10.17

Sketch the Q waveform for the 7476 positive pulse-triggered master-slave flipflop shown in Figure 10–47 with the input waveforms given in Figure 10–48. ...

Verified Answer:

Question: 10.16

How would the Q waveform of Example 10–11 be different if we used a 7476 pulse-triggered master–slave flip-flop instead of the 74LS76? ...

Verified Answer:

During positive pulse 2, J is HIGH for a short tim...
Question: 10.14

J-K Flip-Flop Create a J-K flip-flop using the block design method. Right-click in the block design area and insert the symbol named jkff. Test the design by creating a waveform simulation file. Repeat using the VHDL design entry method. ...

Verified Answer:

Figure 10–41 shows the solution as a bdf file usin...
Question: 10.6

D Latch Create a D latch using the block design method. Right-click in the block design area and insert the symbol named latch. Test the design by creating a waveform simulation file. Repeat using the VHDL design entry method. ...

Verified Answer:

Figure 10–17 shows the solution as a bdf file usin...
Question: 10.13

To illustrate edge triggering, for the negative edge-triggered J-K flip-flop shown in Figure 10–39, let’s draw the Q output in Figure 10–40. (Assume that Q is initially 0.) ...

Verified Answer:

Question: 10.12

For the master–slave J-K flip-flop shown in Figure 10–35, sketch the waveform at Q in Figure 10–36. (Assume that Q is initially 0.) ...

Verified Answer: