Obtain v(t) for 0<t <4 s in the circuit of Fig. 8.116 using PSpice.
Question 8.71: Obtain v(t) for 0<t <4 s in the circuit of Fig. 8.116 ...
The schematic is shown below. We use VPWL and IPWL to model the 39 u(t) V and 13 u(t) A respectively. We set Print Step to 25 ms and Final Step to 4s in the Transient box. A voltage marker is inserted at the terminal of R2 to automatically produce the plot of v(t) after simulation. The result is shown below.
Related Answered Questions
For t = 0-, v(0) = 0.
For t > 0, the circuit is...
The schematic is as shown below. The unit step is ...
The dual is constructed in Figure (a) and redrawn ...
The dual is obtained from the original circuit as ...
The dual circuit is connected as shown in Figure (...
\alpha=300=\frac{1}{2 R C} (1)[/latex...
Let i= inductor current and v= capacitor voltage.
...
For t = 0-, 4u(t) = 0, v(0) = 0, and i(0) = 30/10 ...
For \mathrm{t}=0^{-}, \mathrm{i}(0)=3+12 / ...