Holooly Plus Logo
Holooly Plus Logo

Question 9.Q.3: Add together the following binary numbers, checking your ans...

Add together the following binary numbers, checking your answers with the decimal equivalents:

(a) 1000 + 1000
(b) 1001 +0111
(c) 1010 + 0101 + 1001
(d) 1110 + 0101 + 1101
(e) 10100111 + 00110101

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

(a) 16, (b) 16, (c) 24, (d) 32, (e) 220

Related Answered Questions

Question: 9.PE.7

To investigate the full adder For this exercise you will need the following components and equipment: 1 – 74LS283 ic (4-bit binary full-adder) 1 – +5 V dc power supply 5 – LED (5 mm) and resistor (270 Ω) ...

Verified Answer:

Procedure (a) 1 Connect up the circuit shown in Fi...
Question: 9.PE.3

To investigate the demultiplexer For this exercise you will need the following components and equipment: 1 – 74LS139 ic (dual 1-of-4 demultiplexer) 1 – +5 V dc power supply 4 – LED (5 mm) and series resistor (270 Ω) The pin connection diagram for the 74139 ic is shown in Figure 9.13. For each ...

Verified Answer:

1 Connect up the circuit of Figure 9.14. 2 Work th...
Question: 9.PE.2

To use the multiplexer to implement a Boolean function For this exercise you will need the following components and equipment: 1 – 74LS153 ic (dual 4-to-1 multiplexer) 1 – +5 V dc power supply 1 – LED (5 mm) and series resistor (270 Ω) ...

Verified Answer:

1 Connect up the circuit of Figure 9.6, referring ...
Question: 9.PE.1

To investigate the multiplexer For this exercise you will need the following components and equipment: 1 – 74LS153 ic (dual 4-to-1 multiplexer) 1 – +5 V dc power supply 1 – LED (5 mm) and series resistor (270 Ω) The pin connection diagram for the 74153 ic is shown in Figure 9.5. The following ...

Verified Answer:

1 Connect up the circuit of Figure 9.6, which will...
Question: 9.PE.6

To investigate the decoder For this exercise you will need the following components and equipment: 1 – 74LS42 ic (BCD to decimal decoder) 1 – +5 V dc power supply10 – LED (5 mm) and series resistor (270 Ω) ...

Verified Answer:

1 Connect up the circuit of Figure 9.26. The pin c...
Question: 9.PE.5

To investigate the encoder For this exercise you will need the following components and equipment: 1 – 74LS147 ic (10-line to 4-line priority encoder) 1 – +5 V dc power supply 4 – LED (5 mm) and series resistor (270 Ω) The pin connection diagram of the 74147 ic is shown in Figure 9.20. Note that ...

Verified Answer:

1 Connect up the circuit of Figure 9.21. 2 Work th...
Question: 9.PE.4

To set up a data transmission system For this exercise you will need the following components and equipment: 1 – 74LS153 ic (dual 4-to-1 multiplexer) 1 – 74LS139 ic (dual 1-of-4 demultiplexer) 1 – 74LS93 ic (4-bit binary counter) 1 – 74LS04 ic (hex inverter) 1 – +5 V dc power supply 1 – clock ...

Verified Answer:

1 The outline block diagram of the system is given...
Question: 9.Q.1

Use the multiplexer technique to implement the functions (a) Z = Ā.B + B.C (b) Z = A.B + Ā.C ...

Verified Answer:

(a) Z = Ā.B.\bar{C}.D_0[/lat...