Question 8.8: Compute the maximum shearing stress that would occur in the ...

Applied Strength of Materials

Compute the maximum shearing stress that would occur in the rectangular cross section of a beam like that shown in Figure 8–18. The shearing force is 5.0 kN, t = 50 mm, and h = 200 mm.

143801 8-18

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 8.10

Compute the approximate maximum shearing stress that would occur in a DN80 Schedule 40 steel pipe if it is used as a beam and subjected to a shearing force of 28 kN. ...

Verified Answer:

Equation (8–16) should be used. From Appendix A–9(...

Question: 8.11

Using the web shear formula, compute the shearing stress in an IPE 300×150 beam if it is subjected to a shearing force of 120 kN. ...

Verified Answer:

In Appendix A–7(e) for IPE shapes, it is found tha...

Question: 8.9

Compute the maximum shearing stress that would occur in a circular shaft, 50 mm in diameter, if it is subjected to a vertical shearing force of 110 kN. ...

Verified Answer:

Equation (8–15) will give the maximum shearing str...

Question: 8.13

A fabricated beam is made by riveting square aluminum bars to a vertical plate, as shown in Figure 8–23. The bars are 20 mm square. The plate is 6 mm thick and 200 mm high. The rivets can withstand 800 N of shearing force across one cross section. Determine the required spacing of the rivets if ...

Verified Answer:

Objective Specify a suitable spacing for the rive...

Question: 8.12

Determine the proper spacing of the nails used to secure the flange boards to the web of the built-up I-beam shown in Figure 8–22. All boards are standard 45 × 190 wood shapes. The nails to be used can safely resist 1000 N of shearing force each. The load on the beam is shown in Figure 8–16 with ...

Verified Answer:

Objective Specify a suitable spacing f...

Question: 8.7

For the triangular beam cross section shown in Figure 8–13, compute the shearing stress that occurs at the axes a through g, each 50 mm apart. Plot the variation of stress with posi-tion on the section. The shearing force is 50 kN. ...

Verified Answer:

Objective Compute the shearing stress at seven ...

Question: 8.6

Compute the distribution of shearing stress with position in the cross section for a beam with the rectangular shape shown in Figure 8–7. The actual dimensions are 50 mm by 250 mm. Plot the results. The shearing force, V, on the section of interest is 5400 N. ...

Verified Answer:

Objective Compute the shearing stress...

Question: 8.5

Compute the shearing stress at the axes a–a and b–b for a beam with the T-shaped cross section shown in Figure 8–9. Axis a–a is at the very top of the vertical web, just below the flange. Axis b–b is at the very bottom of the flange. The shearing force, V, on the section of interest is 5400 N. ...

Verified Answer:

Objective Compute the shearing stress at the axe...

Question: 8.4

Compute the shearing stress at the axis a–a for a beam with the rectangular cross section shown in Figure 8–7. The shearing force, V, on the section of interest is 5400 N. ...

Verified Answer:

Objective Compute the shearing stress at the axi...

Question: 8.3

For the T-shaped section in Figure 8–9, compute the first moment of the area Q as it would be used in the general shear formula to compute the vertical shearing stress at the section marked a–a at the very top of the web, just below where it joins the flange. ...

Verified Answer:

Objective Compute the value of Q. Given...