Holooly Plus Logo
Holooly Plus Logo

Question B.21: The circuit of Figure B.13 is a a. Peak detector. b. Half-wa...

The circuit of Figure B.13 is a

a. Peak detector.       b. Half-wave rectifier.      c. Bridge rectifier.       d. Voltage doubler.        e. Full-wave rectifier.

b.13
The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

The correct answer is e.

Related Answered Questions

Question: B.30

The speed of an AC electric motor a. Is independent of the frequency. b. Is directly proportional to the square of the frequency. c. Varies directly with the number of poles. d. Varies inversely with the number of poles. e. None of the above. ...

Verified Answer:

The speed varies inversely with the number of pole...
Question: B.29

he armature resistance of a 55-hp, 525-V, DC shunt wound motor is 0.4Ω. The full-load armature current of this motor is 80 A. If the initial starting current is 175 percent of the full-load value, the resistance of the starting coil in Ω should be nearest to a. 6.6125 b. 3.75 c. 3.35 d. 4.15 ...

Verified Answer:

I_{\text {start }}(\text { starting current...
Question: B.28

A four-pole synchronous motor operating from a 60-Hz supply will have a synchronous speed, in rev/min, of a. 900 b. 1,800 c. 1,200 d. 3,600 e. 4,800 ...

Verified Answer:

Frequency =( no. of poles/2 ...
Question: B.27

For the circuit of Figure B.16, where i=2 A,ϕ=1×10^−3 Wb, cross-sectional area =5 in^2, and the mean flux path length =2 in, the total reluctance R of the magnetic circuit in (A⋅t⋅in^2)/Wb is a. 1×10^5 b. 2×10^5 c. 1.5×10^5 d. 3.5×10^4 e. 2×10^5 ...

Verified Answer:

From Chapter 16, the relationship between magnetom...
Question: B.26

Which of the following is a true characteristic of magnetic flux lines? a. They cross each other. b. They begin and end on electric charges. c. They are parabolic. d. They are continuous. e. None of the above. ...

Verified Answer:

As discussed in Chapter 15, magnetic flux lines ar...
Question: B.25

In Figure B.15, if R1=2.2 kΩ,R3=18 kΩ,v1=120 mV and v2=−40 mV, choose the value of R2 such that v3=0. a. 1.2 kΩ b. 5 kΩ c. 7.33 kΩ d. 0.733 kΩ e. 0.5 kΩ ...

Verified Answer:

Using the summing amplifier equation in Chapter 12...
Question: B.24

 In the circuit of Figure B.15, which value is closest to v3 if R1=2.2 kΩ, R2=1.5 kΩ,R3=18 kΩ,v1=120 mV and v2=−40mV ? a. −250 mV b. 500 mV c. −500 mV d. 1.46 V e. −1.46 V ...

Verified Answer:

Using the summing amplifier equation in Chapter 12...
Question: B.23

The ideal diode D in Figure B.14 will always conduct if: a. V1 is greater than V2. b. V2 is greater than V1. c. V1 is greater than 1 V. d. R2 is an open circuit. e. R1 is an open circuit. ...

Verified Answer:

Using the methodology developed in Chapter 8, we a...
Question: B.22

The inductor L and the capacitor C serve the function of a. Converting the AC input to DC output. b. Increasing the peak value of the output voltage. c. Protecting the diodes. d. A high-pass filter. e. Reducing the ripple component of the output voltage. ...

Verified Answer:

The correct answer is e.
Question: B.20

The total real power delivered from the source to the load is most nearly a. 1496 W b. 580 W c. 1742 W d. 2904 W e. 850 W ...

Verified Answer:

The total power P delivered to the ...