Holooly Plus Logo
Holooly Plus Logo

Question 10.17: Sketch the Q waveform for the 7476 positive pulse-triggered ......

Sketch the Q waveform for the 7476 positive pulse-triggered master-slave flipflop shown in Figure 10–47 with the input waveforms given in Figure 10–48.

Figure 10–47
Report Answer
Figure 10–48
Loading more images...

Related Answered Questions

Question: 10.21

LPM Flip-Flop with Asynchronous Control Use the LPM_FF to implement an octal D flip-flop with asynchronous clear, set, and load. Include an enable to control the clock. Test its operation by producing a set of simulation waveforms that exercise both the asynchronous and synchronous inputs. ...

Verified Answer:

Insert the LPM_FF symbol to a block design file as...
Question: 10.20

LPM Flip-Flop Use the LPM_FF to implement an octal D flip-flop with synchronous clock and data inputs and an asynchronous clear. Test its operation by producing a set of simulation waveforms that exercise both the synchronous and asynchronous inputs. ...

Verified Answer:

Insert the LPM_FF symbol to a new block design fil...
Question: 10.19

For each of the flip-flops shown in Figure 10–55(a), sketch the Q outputs in Figure 10–55(b). ...

Verified Answer:

Question: 10.18

The 74109 is a positive edge-triggered J-K flip-flop. The logic symbol (Figure 10–49) and input waveforms (Figure 10–50) are given; sketch Q. ...

Verified Answer:

Notes: 1. Positive edge triggering. 2. {\ov...
Question: 10.16

How would the Q waveform of Example 10–11 be different if we used a 7476 pulse-triggered master–slave flip-flop instead of the 74LS76? ...

Verified Answer:

During positive pulse 2, J is HIGH for a short tim...
Question: 10.15

Sketch the Q waveform for the 74LS76 negative edge-triggered J-K flip-flop shown in Figure 10–46(a), with the input waveforms given in Figure 10–46(b). ...

Verified Answer:

Note: Q changes only on the negative edge of [late...
Question: 10.14

J-K Flip-Flop Create a J-K flip-flop using the block design method. Right-click in the block design area and insert the symbol named jkff. Test the design by creating a waveform simulation file. Repeat using the VHDL design entry method. ...

Verified Answer:

Figure 10–41 shows the solution as a bdf file usin...
Question: 10.6

D Latch Create a D latch using the block design method. Right-click in the block design area and insert the symbol named latch. Test the design by creating a waveform simulation file. Repeat using the VHDL design entry method. ...

Verified Answer:

Figure 10–17 shows the solution as a bdf file usin...
Question: 10.13

To illustrate edge triggering, for the negative edge-triggered J-K flip-flop shown in Figure 10–39, let’s draw the Q output in Figure 10–40. (Assume that Q is initially 0.) ...

Verified Answer:

Question: 10.12

For the master–slave J-K flip-flop shown in Figure 10–35, sketch the waveform at Q in Figure 10–36. (Assume that Q is initially 0.) ...

Verified Answer: