Holooly Plus Logo
Holooly Plus Logo

Question 8.3: A perfect rectangular pulse is applied to the input of an op......

A perfect rectangular pulse is applied to the input of an operational amplifier. If it takes 4 μs for the output voltage to change from -5 V to +5 V, determine the slew rate of the device.

Step-by-Step
The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.
Report Answer

The slew rate can be determined from:

Slew rate =  \frac{\Delta V_{OUT}}{\Delta t}  =  \frac{10  V}{4  \mu s}  =  2.5  V/\mu s

Related Answered Questions

Question: 8.2

An operational amplifier has an input resistance of 2 MΩ Determine the input current when an input voltage of 5 mV is present. ...

Verified Answer:

Now: R_{IN}  =  \frac{V_{IN}}{I_{IN}}[/late...
Question: 8.1

An operational amplifier operating with negative feedback produces an output voltage of 2 V when supplied with an input of 400 μV. Determine the value of closed-loop voltage gain. ...

Verified Answer:

Now: A_{V(CL)}  =  \frac{V_{OUT}}{V_{IN}}[/...
Question: 8.6

An inverting operational amplifier is to operate according to the following specification: Voltage gain = 100 Input resistance (at mid-band) = 10 kΩ Lower cut-off frequency = 250 Hz Upper cut-off frequency = 15 kHz Devise a circuit to satisfy the above specification using an operational amplifier. ...

Verified Answer:

To make things a little easier, we can break the p...
Question: 8.5

Which of the operational amplifiers in the table would be most suitable for each of the following applications: (a) amplifying the low-level output from a piezoelectric vibration sensor (b) a high-gain amplifier that can be used to faithfully amplify very small signals (c) a low-frequency amplifier ...

Verified Answer:

(a) AD548 (this operational amplifier is designed ...
Question: 8.4

A wideband operational amplifier has a slew rate of 15 V/μs. If the amplifier is used in a circuit with a voltage gain of 20 and a perfect step input of 100 mV is applied to its input, determine the time taken for the output to change level. ...

Verified Answer:

The output voltage change will be 20 × 100 = 2,000...