Question 5.9: A cylindrical shell with r =30 in. is simply supported at th...

Structural Analysis and Design of Process Equipment

A cylindrical shell with r =30 in. is simply supported at the ends. If L=10 ft and t =0.375 in., find the critical buckling pressure for a uniform applied pressure to sides and ends. Let E =29 × $10^{6}$ psi.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 5.7

Derive N𝜃 for the case of applied bending moment M0 at edge x=0 for a short cylinder of length l. ...

Verified Answer:

The four boundary conditions are as follows: At x=...

Question: 5.8

Determine the maximum stress at point A of the thin cylinder shown in Figure 5.14a. Let 𝜇 =0.3. ...

Verified Answer:

A free-body diagram of junction A is shown in Figu...

Question: 5.16

A pressure vessel operating at 300 °F is subjected to a short excursion temperature of 600 °F. At a given time, the temperature distribution in the wall is shown in Figure 5.27. Find the maximum thermal stress at that instance. Let 𝜇 =0.3, E =30 × 10^6 psi, and 𝛼 =6.0 × 10^−6 in./in.- °F. ...

Verified Answer:

This problem can be visualized as a biaxial case w...

Question: 5.15

A thin cylindrical vessel is heated by a jacket from the outside such that the temperature distribution is as shown in Figure 5.26. If E =27 × 10^6 psi, 𝛼 = 9.5 × 10^−6 in./in.- °F, and 𝜇 =0.28, determine the maximum thermal stress (a) using Eq. (5.40) and (b) using Eq. (5.41). ...

Verified Answer:

(a):

T_{ i }

=400–700= −300 °F. He...

Question: 5.14

A vessel that operates at 800 °F is supported by an insulated skirt. The thermal distribution in the skirt is shown in Figure 5.24a. If the top and bottom of the skirt are assumed to be fixed with respect to rotation, what is the maximum stress due to temperature gradient? 𝛼 =7 × 10^−6 in./in.- ...

Verified Answer:

The equation for a linear temperature gradient is ...

Question: 5.13

Determine the bending stress in a cylinder fixed at one edge (Figure 5.23a) due to a uniform rise in temperature of 200 °F, if 𝛼 = 605 × 10^−6 in.∕in.- °F E = 30 × 10^6 psi 𝜇 = 0.3. ...

Verified Answer:

The radial deflection of the cylinder if the ends ...

Question: 5.12

A pipe at 10 °F is partly filled with liquid at 40 °F and gas at 250 °F as shown in Figure 5.22a. What is the maximum thermal stress if 𝛼 =6.5 × 10^−6 in./in.- °F, E =30 × 10^6 psi, and 𝜇 =0.3? ...

Verified Answer:

A solution can be obtained by taking a free-body d...

Question: 5.11

An internal stainless tray is welded to the inside of a carbon-steel vessel as shown in Figure 5.21a. If the coefficient of thermal expansion is 9.5 × 10^−6 in./in.- °F for the tray and 6.7 × 10^−6 in./in.- °F for the vessel, what is the stress in the weld due to a temperature increase of 400 °F? ...

Verified Answer:

A conservative answer can be obtained by assuming ...

Question: 5.10

An internal stainless-steel rod is welded to the inside of a carbon-steel vessel as shown in Figure 5.20. If the coefficient of thermal expansion is 9.5 × 10^−6 in./in.-°F for the rod and 6.7 × 10−6 in./in.-°F for the vessel, what is the stress in weld A due to a temperature increase of 400°F? Use ...

Verified Answer:

Weld A is essentially subjected to a uniaxial stre...

Question: 5.6

A stiffening ring is placed around a cylinder at a distance from the ends as shown in Figure 5.12. The cylinder has a radius of 50.0 in. and a thickness of 0.25 in. and is subjected to an internal pressure of 100 psi. Assuming E =30 × 10^6 psi and 𝜇 =0.3, find a) The discontinuity stress in the ...

Verified Answer:

A free-body diagram of the shell-to-ring junction ...