Question 4.2: A four-pole dc generator having wave wound armature winding ...

Basic Electrical and Electronics Engineering-II
Basic Electrical and Electronics Engineering
Basic Electrical and Electronics Engineering [1015987]
Basic Electrical and Electronics Engineering

A four-pole dc generator having wave wound armature winding has 51 slots, each slot containing 20 conductors. Calculate the voltage generated in the armature when driven at 1500 rpm. Assume flux per pole to be 0.5 mWb.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 4.18

A 1500 kVA, 3300V, 50Hz, three-phase, star-connected synchronous generator has an armature resistance of 0.2 Ω per phase. A field current of 50 A produces a short-circuit current of 262 A and an open-circuit EMF of 1200 V between the lines. Calculate voltage regulation of the generator on full load ...

Verified Answer:

Total kVA = 1500 kVA per phase

= \frac{1500...

Question: 4.17

A 3 MVA, 6600 V, three-phase, star connected synchronous generator has a resistance of 0.2 Ω and synchronous reactance of 3.5 Ω per phase. Calculate the regulation at rated output at 0.8 power factor lagging. The speed and excitation remain constant. ...

Verified Answer:

Given line voltage = 6600 V phase voltage

...

Question: 4.16

A 400 V, 50 Hz, three-phase induction motor is rotating at 960 rpm on full load. Calculate the following for the motor: Number of poles; full-load slip; frequency of rotor-induced EMF; speed of the rotor magnetic field with respect to the rotor. Also show that both the stator field and the rotor ...

Verified Answer:

f = 50 Hz P = 2, 4, 6, etc.

N_{s} = \frac{...

Question: 4.15

A six-pole, three-phase synchronous generator driven at 1000 rpm supplies power to an induction motor which runs at a speed of 1440 rpm on full load. Calculate the percentage slip of the motor and the number of poles of the motor. ...

Verified Answer:

The synchronous generator is rotated at a synchron...

Question: 4.14

A slip-ring-type three-phase induction motor rotates at a speed of 1440 rpm when a 400 V, 50 Hz is applied across the stator terminals. What will be the frequency of the rotor-induced EMF? ...

Verified Answer:

We know the synchronous speed of the rotating magn...

Question: 4.13

The frequency of the rotor-induced EMF of 400 V, three-phase, 50 Hz, six-pole induction motor is 2 Hz. Calculate the speed of the motor. ...

Verified Answer:

N_{s} = \frac{120 f}{P} = \frac{120 × 5...

Question: 4.9

Calculate the output power of a 12-pole separately excited having 1200 lap connected conductors each carrying a current if 15 A. The armature is being driven at 300 rpm. The flux per pole is 60 mWb. Resistance if armature circuit is 0.1 Ω. ...

Verified Answer:

Current flowing in each parallel path is the same ...

Question: 4.8

A four-pole dc generator has 1000 conductors. The flux per pole is 25 mWb. Calculate the EMF induced when the armature is lap connected and run at 1500 rpm. At what speed the generator must be driven to produce the same EMF with the armature winding wave connected? ...

Verified Answer:

Case I P = 4, Z = 1000,

Φ = 25 × 10^{−3} W...

Question: 4.7

A four-pole 220 V dc series motor has 240 slots in the armature and each slot has six conductors. The armature winding is wave connected. The flux per pole is 1.75 × 10^−2 Wb when the motor takes 80 A. The field resistance is 0.05 Ω and the armature resistance is 0.1 Ω. The iron and friction losses ...

Verified Answer:

In a series motor the armature winding and the fie...

Question: 4.3

A six-pole, lap-connected dc generator has a total of 650 conductors. The flux per pole is 0⋅05 Wb. Calculate the speed at which the armature is to be driven to generate an EMF of 220 V. ...

Verified Answer:

P = 6, A = P = 6 (because the armature winding is ...