Question 2.35: A magnetic flux density of B = 0.05 T appears in a magnetic...

Fundamentals of Electromagnetics with Matlab

A magnetic flux density of B = 0.05 T appears in a magnetic material with $\mu_{r} = 50$ . Find the magnetic susceptibility $\chi_m$ and the magnetic field intensity H .

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 2.31

Calculate the Larmor radius for an electron and an argon ion that pass through a magnetic field of 0.01 T. Both particles have been accelerated through a potential difference of one volt. ...

Verified Answer:

Before calculating the Larmor radius for either pa...

Question: 2.37

Write a set of coupled equations for the coupled circuit shown in (a). The iron has a cross-sectional area of A and a relative permeability µr . An equivalent circuit is given in (b). ...

Verified Answer:

In this circuit, the mean distances between the in...

Question: 2.41

Two homogeneous, linear, isotropic magnetic materials have an interface at x = 0. At the interface, there is a surface current with a density JL = 20 uy A/m. The relative permeability µr1 = 2 and the magnetic field intensity in the region x < 0 is H1 = 15ux +10 uy + 25uz A/m. The relative ...

Verified Answer:

The magnetic field is separated into components an...

Question: 2.42

Two grounded semi infinite metallic plates are placed on the x axis and the y axis of a Cartesian coordinate system in order to form a 90° corner. A positive charge 4πεo is located at the point (a, a) where a is arbitrary. Using MATLAB, carefully plot equipotential contours surrounding this charge ...

Verified Answer:

There will be 2 negative image charges located at ...

Question: 2.40

Calculate the change of electric field as it crosses an interface between the two dielectrics shown below. There is no charge distributed on the surface between the two dielectrics. ...

Verified Answer:

Since there is no surface charge between the two s...

Question: 2.39

Calculate the mutual inductance M between two small parallel circular loops that have surface areas s1 and s2 that are separated by a large distance d. There are N1 turns that have a current I1 in the first loop and N2 turns in the second loop. The dashed lines indicate the magnetic flux density ...

Verified Answer:

The mutual inductance between the two loops is cal...

Question: 2.38

Calculate the self inductance between two parallel planes. This object is frequently called a “microstrip” or “microstrip line” transmission line and it is important for the understanding of integrated circuits.The separation distance d can be assumed to be much less than the width w. ...

Verified Answer:

Since the current in each of the each of the condu...

Question: 2.36

Assume that the reluctance of the gap is equal to the reluctance of the iron in Figure 2-40. The iron has a relative permeability of µr = 1000. Determine the length of the gap in terms of the length of the iron. ...

Verified Answer:

The reluctance of the two regions is defined as [l...

Question: 2.34

Formally demonstrate that the sum of the forces acting on the rectangular loop shown and Figure 2-34 is identically equal to 0 which implies that this loop will not translate in any direction. ...

Verified Answer:

The magnetic flux density is B = Bouz. Using...

Question: 2.33

A lightning rod is a device that provides an attractive path through a wire for lightning to discharge so that a building is hopefully protected. In order to attract the lightning to the rod, the path must originally have a low resistance. However, after the lightning stroke starts to discharge ...

Verified Answer:

The lightning stroke will discharge through the sh...