Question 7.7: A transistor has hfe = 150 and hie = 1.5 kΩ. Assuming that h...

Electronic Circuits Fundamentals and Applications

A transistor has $h_{fe}$ = 150 and $h_{ie}$ = 1.5 kΩ.
Assuming that $h_{re}$ and $h_{oe}$ are both negligible, determine the value of load resistance required to produce a voltage gain of 200.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 7.9

The characteristic curves shown in Fig. 7.37 relate to a transistor operating in common-emitter mode. If the transistor is operated with I B = 30 μA, a load resistor of 1.2 kΩ and an 18 V supply, determine the quiescent values of collector voltage and current (VCQ and I CQ). Also determine the ...

Verified Answer:

First we need to construct the load line. The two ...

Question: 7.8

Determine the static value of current gain and collector voltage in the circuit shown in Fig. 7.35. ...

Verified Answer:

Since 2 V appears across R4, we can determine the ...

Question: 7.6

A BFY50 transistor is used in a common-emitter amplifier stage with RL = 10 kΩ and I C = 1 mA. Determine the output voltage produced by an input signal of 10 mV. (You may ignore the effect of hre and any bias components that may be present externally.) ...

Verified Answer:

The equivalent circuit (with

h_{re} [/late...

Question: 7.5

An integrated circuit that produces an openloop gain of 100 is to be used as the basis of an amplifier stage having a precise voltage gain of 20. Determine the amount of feedback required. ...

Verified Answer:

Re-arranging the formula,

G=\frac{A_v}{1+\...

Question: 7.4

If, in Example 7.3, the amplifier’s open-loop voltage gain increases by 20%, determine the percentage increase in overall voltage gain. ...

Verified Answer:

The new value of voltage gain will be given by: [l...

Question: 7.3

An amplifier with negative feedback applied has an open-loop voltage gain of 50, and one-tenth of its output is fed back to the input (i.e. β = 0.1). Determine the overall voltage gain with negative feedback applied. ...

Verified Answer:

With negative feedback applied the overall voltage...

Question: 7.2

Determine the mid-band voltage gain and upper and lower cut-off frequencies for the amplifier whose frequency response is shown in Fig. 7.12. ...

Verified Answer:

The mid-band voltage gain corresponds with the fla...

Question: 7.1

An amplifier produces an output voltage of 2 V for an input of 50 mV. If the input and output currents in this condition are, respectively, 4 mA and 200 mA, determine: (a) the voltage gain; (b) the current gain; (c) the power gain. ...

Verified Answer:

(a) The voltage gain is calculated from:

A...