Question 9.6: A wave-wound armature of an 8-pole generator has 51 slots. E...

Basic Electrical Engineering

A wave-wound armature of an 8-pole generator has 51 slots. Each slot contains 16 conductors. The voltage required to be generated is 300 V. What would be the speed of coupled prime mover if flux per pole is 0.05 Wb? If the armature is rewound as lap-wound machine and run by same prime mover, what will be the generated voltage?

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 9.10

A 6-pole, lap-wound DC motor takes 340 A when the speed is 400 rpm. The flux per pole is 0.05 Wb and the armature has 864 turns. Neglecting mechanical losses, calculate the BHP of the motor. ...

Verified Answer:

Here, P = 6; A = P = 6 (lap wound);

I_{L}[...

Question: 9.9

A 4-pole DC motor has a wave-wound armature with 594 conductors. The armature current is 40 A and flux per pole is 7.5 mWb. Calculate H.P. of the motor when running at 1,440 rpm. ...

Verified Answer:

Torque developed,

T = \frac{P Z \varphi I_...

Question: 9.8

The induced emf in a DC machine is 200 V at a speed of 1,200 rpm. Calculate the electromagnetic torque developed at an armature current of 15 A. ...

Verified Answer:

Here,

E_{b}

= 200 V; N = 1,200 rp...

Question: 9.7

A 50 H.P., 400 V, 4-pole, 1,000 rpm, DC motor has flux per pole equal to 0.027 Wb. The armature having 1,600 conductors is wave connected. Calculate the gross torque when the motor takes 70 A. ...

Verified Answer:

Torque developed,

T = \frac{P \phi Z I_{a...

Question: 9.5

An 8-pole DC generator has 600 armature conductors and a useful flux of 0.06 Wb. What will be the emf generated if it is lap wound and runs at 1,000 rpm? What must be the speed at which it is to be driven to induce the same voltage if it is wave wound? ...

Verified Answer:

Here, P = 8; Z = 600; Φ = 0.06 Wb; N = 1,000 rpm A...

Question: 9.4

A 6-pole machine has an armature with 90 slots and 8 conductors per slot, the flux per pole is 0.05 Wb and rms at 1,000 rpm. Determine induced emf if winding is (i) lap connected and (ii) wave connected. ...

Verified Answer:

Here, P = 6; Φ = 0.05 Wb; N = 1,000 rpm Number of ...

Question: 9.3

A 4-pole, lap-wound armature has 144 slots with two coil sides per slot, where each coil has two turns. If the flux per pole is 20 mWb and the armature rotates at 720 rpm, what is the induced emf (i) across the armature and (ii) across each parallel path? each phase. ...

Verified Answer:

Here, P = 4; A = P = 4 (lap wound); f = 20 mWb = 2...

Question: 9.2

Calculate the voltage induced in the armature winding of a 4-pole, wave wound DC machine having 500 conductors and running at 1,000 rpm. The flux per pole is 30 mWb. ...

Verified Answer:

Here, P = 4; A = 2 (wave wound); Z = 728; N = 1,80...

Question: 9.1

An 8-pole lap-wound DC generator has 960 conductors, a flux of 40 mWb per pole and is driven at 400 rpm. Find OC emf. ...

Verified Answer:

Open-circuit emf,

E_{g} = \frac{\phi Z N ...