Question 20.P.10: Construct an influence line for the force in the member CD o...

Structural and Stress Analysis

Construct an influence line for the force in the member CD of the truss shown in Fig. P.20.10 and calculate the force in the member produced by the loads positioned at C, D and E.

p20.10

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 20.5

A simply supported beam AB has a span of 5 m and carries a uniformly distributed dead load of 0.6 kN/m (Fig. 20.12(a)). A similarly distributed live load of length greater than 5 m and intensity 1.5 kN/m travels across the beam. Calculate the length of beam over which reversal of shear force occurs ...

Verified Answer:

The shear force at a section of the beam will be a...

Question: 20.4

A load of length 2 m and intensity 2 kN/m crosses the simply supported beam AB shown in Fig. 20.9(a). Calculate the maximum positive and negative values of shear force and the maximum value of bending moment at the quarter span point. ...

Verified Answer:

The shear force and bending moment influence lines...

Question: 20.P.18

Derive the equation for the unit influence line for the vertical reaction at B in the continuous beam shown in Fig. P.20.18 and hence find its value when a uniformly distributed load of intensity 24 kN/m covers the span AB. ...

Verified Answer:

Remove the support at B and apply a vertical load ...

Question: 20.P.17

Derive the equation for the unit influence line for the reaction at the support B in the continuous beam shown in Fig. P.20.17 and calculate its value if a uniformly distributed load of intensity 20 kN/m covers the span AB; the flexural rigidity of the beam is EI. Also sketch the unit influence ...

Verified Answer:

Remove the support at B and apply a vertical load ...

Question: 20.P.16

Determine the equation of the influence line for the reaction at A in the continuous beam shown in Fig. P.20.16 and determine its value when a load of 30 kN/m covers the span AB. ...

Verified Answer:

Release the beam at A and apply a load W as shown ...

Question: 20.P.15

Using the Mueller-Breslau principle sketch the shape of the influence lines for the support reactions at A and B, and the shear force and bending moment at E in the continuous beam shown in Fig. P.20.15. ...

Verified Answer:

The influence lines are shown in Figs S.20.15(a), ...

Question: 20.P.14

The Pratt truss shown in Fig. P.20.14 has a self-weight of 1.2 kN/m and carries a uniformly distributed live load longer than the span of intensity 2.8 kN/m, both being applied at the upper chord joints. If the diagonal members are designed to resist tension only, determine which panels require ...

Verified Answer:

The family of influence lines for the shear force ...

Question: 20.P.13

Fig. P.20.13(a) represents a bridge structure with a suspended span so that C and D are hinged connections. Sketch dimensioned influence lines for the vertical reactions at A and B and the shearing force at the hinge C. The truss shown in Fig. P.20.13(b) is supported at A, E and H. A scale model ...

Verified Answer:

The required unit influence lines are shown in Fig...

Question: 20.P.12

One of the main girders of a bridge is the truss shown in Fig. P.20.12. Loads are transmitted to the truss through cross beams attached at the lower panel points. The self-weight of the truss is 30 kN/m and it carries a live load of intensity 15 kN/m and of length greater than the span. Draw ...

Verified Answer:

When unit load is to the right of E,

F_{CE}...

Question: 20.P.11

The truss shown in Fig. P.20.11 carries a train of loads consisting of, left to right, 40, 70, 70 and 60 kN spaced at 2, 3 and 3 m, respectively. If the self-weight of the truss is 15 kN/m, calculate the maximum force in each of the members CG, HD and FE. ...

Verified Answer:

From the method of sections

F_{\mathrm{CG}}...