Question 5.17: Find the value for the t14 distribution whose lower-tail pro...

Principles of Statistics for Engineers and Scientists

Find the value for the t $_{14}$ distribution whose lower-tail probability is 0.01.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Related Answered Questions

Question: 5.22

The lengths of bolts manufactured by a certain process are known to be normally distributed. In a sample of 30 bolts, the average length was 10.25 em, with a standard deviation of 0.20 em. Find a tolerance interval that includes 90% of the lengths of the bolts with 95% confidence. ...

Verified Answer:

We have

\bar{X}=10.25

and s = 0.20....

Question: 5.21

A sample of 10 concrete blocks manufactured by a certain process had a mean compressive strength of X = 1312 MPa, with standard deviations= 25 MPa. Find a 95% prediction interval for the strength of a block that has not yet been measured. ...

Verified Answer:

For a 95% prediction interval, α = 0.025. We have ...

Question: 5.20

Refer to Example 5.18. Assume that on the basis of a very large number of previous measurements of other beams, the population of shear strengths is known to be approximately normal, with standard deviation σ = 180.0 kN. Find a 99% confidence interval for the mean shear strength. ...

Verified Answer:

We compute

\bar{X}=668.27

. We do n...

Question: 5.18

The article “Direct Strut-and-Tie Model for Prestressed Deep Beams” (K. Tan, K. Tong, and C. Tang, Journal of Structural Engineering, 2001: 1076-1084) presents measurements of the nominal shear strength (in kN) for a sample of 15 prestressed concrete beams. The results are 1s it appropriate to use ...

Verified Answer:

To determine whether the Student's t distribution ...

Question: 5.16

Find the value for the t12 distribution whose upper-tail probability is 0.025. ...

Verified Answer:

Look down the column headed "0.025" to the row cor...

Question: 5.15

Refer to Example 5.14. Find P(t > 1.5). ...

Verified Answer:

Looking across the row corresponding to 9 degrees ...

Question: 5.14

A random sample of size 10 is to be drawn from a normal distribution with mean 4. The Student’s t statistic t = (X- 4)/ (s / √10) is to be computed. What is the probability that t > 1.833? ...

Verified Answer:

This t statistic has 10-1 = 9 degrees of freedom. ...

Question: 5.6

Based on the microdrill lifetime data presented in Example 5.4, an engineer reported a confidence interval of (11.09, 14.27) but neglected to specify the level. What is the level of this confidence interval? ...

Verified Answer:

The confidence interval has the form

\bar{X...

Question: 5.5

Use the data in Example 5.4 to find an 80% confidence interval. ...

Verified Answer:

To find an 80% confidence interval, set 1- α = 0.8...

Question: 5.3

The sample mean and standard deviation for the cold cranking amperages of 100 batteries are X = 185.5 and s = 5.0. Find an 85% confidence interval for the mean amperage of the batteries. ...

Verified Answer:

We must find the point estimate, the standard erro...