For the beam and loading shown, determine the slope and deflection at point B.

Question

Accepted Answer

Principle of Superposition. The given loading can be obtained by superposing the loadings shown in the following “picture equation.” The beam AB is, of course, the same in each part of the figure.

For each of the loadings I and II, we now determine the slope and deflection at B by using the table of Beam Deflections and Slopes in App. C.

Loading I

[latex](θ_{B})_{I} = -\frac{wL^{3}}{6EI} (y_{B})_{I} = -\frac{wL^{4}}{8EI}[/latex]

Loading II

[latex](θ_{C})_{II} = + \frac{w(L/2)^{3}}{6EI} = + \frac{wL^{3}}{48EI} (y_{C})_{II} = + \frac{w(L/2)^{4}}{8EI}= +\frac{wL^{4}}{128EI}[/latex]

In portion CB, the bending moment for loading II is zero and thus the elastic curve is a straight line.

[latex](θ_{B})_{II} =(θ_{C})_{II} = +\frac{wL^{3}}{48EI} (y_{B})_{II} = (y_{C})_{II} + (θ_{C})_{II} \left(\frac{L}{2}\right)[/latex]

[latex]=\frac{wL^{4}}{128EI} + \frac{wL^{3}}{48EI} \left(\frac{L}{2}\right) = + \frac{7wL^{4}}{384EI}[/latex]

Slope at Point B

[latex]θ_{B} = (θ_{B})_{I} + (θ_{B})_{II} = - \frac{wL^{3}}{6EI} + \frac{wL^{3}}{48EI}= - \frac{7wL^{3}}{48EI} θ_{B} = \frac{7wL^{3}}{48EI}⦪[/latex]

Deflection at B

[latex]y_{B} = (y_{B})_{I} + (y_{B})_{II} = - \frac{wL^{4}}{8EI} + \frac{7wL^{4}}{384EI} = - \frac{41wL^{4}}{384EI} y_{B} =\frac{41wL^{4}}{384EI} ↓[/latex]

Question 15.S-P.4: For the beam and loading shown, determine the slope and defl...

Related Answered Questions

For the beam and loading shown, determine the reaction at the fixed support C. ...

Verified Answer:

For the uniform beam and loading shown, determine (a) the reaction at each support, (b) the slope at end A. ...

Verified Answer:

Determine the reactions at the supports for the prismatic beam and loading shown in Fig. 15.29. (This is the same beam and loading as in Example 15.5 of Sec. 15.5.) ...

Verified Answer:

Determine the slope and deflection at D for the beam and loading shown (Fig. 15.27) knowing that the flexural rigidity of the beam is EI = 100 MN . m². ...

Verified Answer:

For the uniform beam AB, (a) determine the reaction at A, (b) derive the equation of the elastic curve, (c) determine the slope at A. (Note that the beam is statically indeterminate to the first degree.) ...

Verified Answer:

For the beam and loading shown, determine (a) the equation of the elastic curve, (b) the slope at end A, (c) the maximum deflection. ...

Verified Answer:

The simply supported prismatic beam AB carries a uni- 611 formly distributed load w per unit length (Fig. 15.12). Determine the equation of the elastic curve and the maximum deflection of the beam. ...

Verified Answer:

The overhanging steel beam ABC carries a concentrated load P at end C. For portion AB of the beam, (a) derive the equation of the elastic curve, (b) determine the maximum deflection, (c) evaluate ymax for the following data: W14 × 68 I=723 in^4 E=29×10^6 psi P=50 kips L=15 ft =180 in. a=4 ft ...

Verified Answer:

Determine the reactions at the supports for the prismatic 617 beam of Fig. 15.23a. ...

Verified Answer:

The simply supported prismatic beam AB carries a uniformly distributed load w per unit length (Fig. 15.21). Determine the equation of the elastic curve and the maximum deflection of the beam. (This is the same beam and loading as in Example 15.2.) ...

Verified Answer: