Question 1.P.12: Liquid flows down an inclined surface as a film. On what var...

Chemical Engineering: Solutions to the Problems in Volume 1

Liquid flows down an inclined surface as a film. On what variables will the thickness of the liquid film depend? Obtain the relevant dimensionless groups. It may be assumed that the surface is sufficiently wide for edge effects to be negligible.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 1.2

Compare the costs of electricity at 1 p per kWh and gas at 15 p per therm. ...

Verified Answer:

Each cost is calculated in p/MJ. 1 kWh = 1 kW × 1 ...

Question: 1.P.5

It is found experimentally that the terminal settling velocity u0 of a spherical particle in a fluid is a function of the following quantities: particle diameter, d; buoyant weight of particle (weight of particle _ weight of displaced fluid), W; fluid density, ρ, and fluid viscosity, μ. Obtain ...

Verified Answer:

If:

u_0=k d^a W^b \rho^c \mu^d

, the...

Question: 1.P.4

The power required by an agitator in a tank is a function of the following four variables: (a) diameter of impeller, (b) number of rotations of the impeller per unit time, (c) viscosity of liquid, (d) density of liquid. From a dimensional analysis, obtain a relation between the power and the four ...

Verified Answer:

If the power

P=\phi(D N \rho \mu)

, ...

Question: 1.P.15

A spherical particle settles in a liquid contained in a narrow vessel. Upon what variables would you expect the falling velocity of the particle to depend? Obtain the relevant dimensionless groups. For particles of a given density settling in a vessel of large diameter, the settling velocity is ...

Verified Answer:

This problem is very similar to Problem 1.13, alth...

Question: 1.P.19

Upon what variables would the rate of filtration of a suspension of fine solid particles be expected to depend? Consider the flow through unit area of filter medium and express the variables in the form of dimensionless groups. It is found that the filtration rate is doubled if the pressure ...

Verified Answer:

The volume flow of filtrate per unit area, u m³/m²...

Question: 1.P.18

A sphere, initially at a constant temperature, is immersed in a liquid whose temperature is maintained constant. The time t taken for the temperature of the centre of the sphere to reach a given temperature θc is a function of the following variables: Diameter of sphere, d Thermal conductivity of ...

Verified Answer:

In this case,

t= f \left(d, k, \rho, C_p, \...

Question: 1.P.17

The resistance force on a spherical particle settling in a fluid is given by Stokes’ Law. Obtain an expression for the terminal falling velocity of the particle. It is convenient to express experimental results in the form of a dimensionless group which may be plotted against a Reynolds group with ...

Verified Answer:

The accelerating force due to gravity = mass of pa...

Question: 1.P.16

A liquid is in steady state flow in an open trough of rectangular cross section inclined at an angle θ to the horizontal. On what variables would you expect the mass flow per unit time to depend? Obtain the dimensionless groups which are applicable to this problem. ...

Verified Answer:

This problem is similar to Problems 1.11 and 1.12 ...

Question: 1.P.14

Heat is transferred from condensing steam to a vertical surface and the resistance to heat transfer is attributable to the thermal resistance of the condensate layer on the surface. What variables are expected to affect the film thickness at a point? Obtain the relevant dimensionless groups. For ...

Verified Answer:

For a film of liquid flowing down a vertical surfa...

Question: 1.P.9

Obtain by dimensional analysis a functional relationship for the wall heat transfer coefficient for a fluid flowing through a straight pipe of circular cross-section. Assume that the effects of natural convection may be neglected in comparison with those of forced convection. It is found by ...

Verified Answer:

For heat transfer for a fluid flowing through a ci...