Holooly Plus Logo
Holooly Plus Logo

Question 16.AP.1: MAXIMUM ENERGY DESIGN How should three capacitors and two ba...

MAXIMUM ENERGY DESIGN

How should three capacitors and two batteries be connected so that the capacitors will store the maximum possible energy?

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

The energy stored in the capacitor is pro portional to the capacitance and the square of the potential difference, so we would like to maximize each of these quan tities. If the three capacitors are connected in parallel, their capacitances add, and if the batteries are in series, their poten tial differences, similarly, also add together.

Related Answered Questions

Question: 16.11

A PAPER-FILLED CAPACITOR GOAL Calculate fundamental physical properties of a parallel-plate capacitor with a dielectric. PROBLEM A parallel-plate capacitor has plates 2.0 cm by 3.0 cm. The plates are separated by a 1.0-mm thickness of paper. Find (a) the capacitance of this device and (b) the ...

Verified Answer:

(a) Find the capacitance of this device. Substitut...
Question: 16.12

CAPA CITORS WITH TWO DIELECTRICS GOAL Derive a symbolic expression for a parallel-plate capacitor with two dielectrics. PROBLEM A parallel-plate capacitor has dielectrics with constants κ1 and κ2 between the two plates, as shown in Figure 16.29. Each dielectric fills exactly half the volume between ...

Verified Answer:

(a) Derive an expression for the potential differe...
Question: 16.AP.2

STUD FINDERS If you have ever tried to hang a picture on a wall securely, you know that it can be difficult to locate a wooden stud in which to anchor your nail or screw. The principles discussed in this section can be used to detect a stud electronically. The pri mary element of an electronic stud ...

Verified Answer:

As the detector is moved along a wall, its capacit...
Question: 16.10

TYPICAL VOLTAGE, ENERGY, AND DISCHARGE TIME FOR A DEFIBRILLATOR GOAL Apply energy and power concepts to a capacitor. PROBLE M A fully charged defibrillator contains 1.20 kJ of energy stored in a 1.10×10^-4 F capacitor. In a discharge through a patient, 6.00×10² J of electrical energy is delivered ...

Verified Answer:

(a) Find the voltage needed to store 1.20 \...
Question: 16.9

EQUIVALENT CAPACITANCE GOAL Solve a complex combination of series and parallel capacitors. PROBLEM (a) Calculate the equivalent capacitance between a and b for the combination of capacitors shown in Figure 16.22a. All capacitances are in microfarads. (b) If a 12−V battery is connected across the ...

Verified Answer:

(a) Calculate the equivalent capacitance. Find the...
Question: 16.8

FOUR CAPACITORS CONNECTED IN SERIES GOAL Find an equivalent capacitance of capacitors in series, and the charge and voltage on each capacitor. PROBLEM Four capacitors are connected in series with a battery, as in Figure 16.21. (a) Calculate the capacitance of the equivalent capacitor. (b) Compute ...

Verified Answer:

(a) Calculate the equivalent capacitance of the se...
Question: 16.7

FOUR CAPACITORS CONNECTED IN PARALLEL GOAL Analyze a circuit with several capacitors in parallel. PROBLEM (a) Determine the capacitance of the single capacitor that is equivalent to the parallel combination of capacitors shown in Figure 16.19. Find (b) the charge on the 12.0-μF capacitor and (c) ...

Verified Answer:

(a) Find the equivalent capacitance. Apply Equatio...
Question: 16.6

A PARALLEL-PLATE CAPACITOR GOAL Calculate fundamental physical properties of a parallel-plate capacitor. PROBLEM A parallel-plate capacitor has an area A=2.00×10^−4 m² and a plate separation d=1.00×10^−3 m. (a) Find its capacitance. (b) How much charge is on the positive plate if the capacitor is ...

Verified Answer:

(a) Find the capacitance. Substitute into Equation...
Question: 16.5

ELECTRIC POTENTIAL ENERGY AND DYNAMICS GOAL Apply conservation of energy and electrical potential energy to a configuration of charges. PROBLEM Suppose three protons lie on the x axis, at rest relative to one another at a given instant of time, as in Figure 16.9. If proton q3 on the right is ...

Verified Answer:

Calculate the electric potential energy associated...
Question: 16.4

FINDING THE ELECTRIC POTENTIAL GOAL Calculate the electric potential due to a collection of point charges. PROBLEM A 5.00- μC point charge is at the origin, and a point charge q2=−2.00μC is on the x-axis at (3.00,0)m, as in Figure 16.8. (a) If the electric potential is taken to be zero at infinity, ...

Verified Answer:

(a) Find the electric potential at point P[...