Holooly Plus Logo
Holooly Plus Logo

Question 8.P.1: Obtain the frequency of vibration of the system shown in Pro...

Obtain the frequency of vibration of the system shown in Problem 2.1 by using Rayleigh’s method.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

\omega=\sqrt{\frac{4 k}{M+\frac{3 m}{2}}}

Related Answered Questions

Question: 8.12

Calculate the response of the tower in Example 8.9 to the loading shown there for the first 1.0 s using a numerical integration technique. Assume that damping in the system is 10% of critical and use h = 0.1 s. ...

Verified Answer:

We will obtain the response using (a) the constant...
Question: 8.P.15

An eccentric mass shaker installed on the top floor of the three-story shear frame building shown in Figure P8.15 produces a harmonic force p0 sin Ωt, where p0 = 45  kN and Ω= 5π/3 rad/s. The frame is modeled as a single-degree-of-freedom system by assuming that the vibration shape is ...

Verified Answer:

Maximum base shear at 0.5 s = 103.8 kN.
Question: 8.P.13

Repeat Problem 8.11 using the central difference method. ...

Verified Answer:

\begin{array}{ccccc} \hline \text { Time } ...
Question: 8.P.9

The single story building shown in Figure P8.9 is subjected to a blast load whose effect can be represented by a story level lateral force as indicated. The total lateral stiffness of the building is 14 kips/in and the floor deck mass is 0.1 kip ·s²/in · Obtain the displacement response history for ...

Verified Answer:

The applied load is 50\left(e^{-4 t}-e^{-8 ...
Question: 8.P.11

Obtain the response of the structure in Problem 8.9 by the average acceleration method. Assume that damping is 10% of critical and use a time step of 0.05 s. ...

Verified Answer:

\begin{array}{lccrrrccr} \hline n & \te...
Question: 8.P.7

Determine the frequency of vibration of the beam shown in Figure P8.7 by using Rayleigh’s method. Assume that the vibration shape is similar to that produced by the deflection of the beam under self weight gravity load applied in the appropriate direction. ...

Verified Answer:

\omega=1.61 \sqrt{\frac{E I}{\bar{m} L^{4}}...
Question: 8.P.5

The aluminum beam shown in Figure P8.5 carries a small hoist weighing 450 N. Calculate the frequency of vibration when the hoist is at a distance of 1.2 m. from one support. What are the lowest and highest frequencies and the corresponding hoist locations? E = 69,000 MPa and ρ = 2770 kg/m3 for ...

Verified Answer:

With an assumed vibration shape \psi(x)=\si...
Question: 8.P.3

Using Rayleigh’s method, obtain the frequency of vibration for small oscillations of the inverted pendulum shown in Figure P8.3. ...

Verified Answer:

\omega=\sqrt{\frac{2 k}{m}\left(\frac{a}{l}...
Question: 8.14

Solve Example 8.12 by the central difference method with h = 0.1 s ...

Verified Answer:

On substituting for m, c, k, and [l...
Question: 8.13

Solve Example 8.12 by the Wilson θ method using θ = 1.5 and h = 0.1 s. ...

Verified Answer:

Substitution of m, c, k, h, and [la...