Holooly Plus Logo

Question 7.6: Resin-based composites are used in restorative dentistry. Th...

Resin-based composites are used in restorative dentistry. The article “Reduction of Polymerization Shrinkage Stress and Marginal Leakage Using Soft-Start Polymerization”
(C. Ernst, N. Brand, et al. , Journal of Esthetic and Restorative Dentistry, 2003: 93-1 04) presents a comparison of the surface hardness of specimens cured for 40 seconds with constant power with that of specimens cured for 40 seconds with exponentially increasing power. Fifteen specimens were cured with each method. Those cured with constant power had an average surface hardness (in N/mm²) of 400.9 with a standard deviation of 1 0.6. Those cured with exponentially increasing power had an average sur-face hardness of 367.2 with a standard deviation of 6.1. Find a 98% confidence interval for the difference in mean hardness between specimens cured by the two methods.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.
Already have an account?

Related Answered Questions