Question 24.10: The 1000 Hz square wave in Fig. 24.31 is applied to the R-C ...

The 1000 Hz square wave in Fig. 24.31 is applied to the R-C circuit of the same figure.
a. Compare the pulse width of the square wave to the time constant of the circuit.
b. Sketch v_{C}.
c. Sketch i_{C}.

24.31
The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

\text { a. } \quad T=\frac{1}{f}=\frac{1}{1000}=1 ms.

t_{p}=\frac{T}{2}=0.5 ms.

\tau=R C=\left(5 \times 10^{3} \Omega\right)\left(0.01 \times 10^{-6} F \right)=0.05 ms.

\frac{t_{p}}{\tau}=\frac{0.5 ms }{0.05 ms }=10 \text { and }

t_{p}=10 \tau=\frac{T}{2}.

\text { The result reveals that } v_{C} \text { charges to its final value in half the pulse width.}

 

\text { b. For the charging phase, } V_{i}=0 V \text { and } V_{f}=10 mV \text {, and }

v_{C}=V_{f}+\left(V_{i}-V_{f}\right) e^{-t / R C}.

=10 mV +(0-10 mV ) e^{-t / \tau}.

and    v_{C}=10 mV \left(1-e^{-t / \tau}\right).

\text { For the discharge phase, } V_{i}=10 mV \text { and } V_{f}=0 V , \text { and }

v_{C}=V_{f}+\left(V_{i}-V_{f}\right) e^{-t / \tau}.

=0 V +(10 mV -0 V ) e^{-t / \tau}.

and    v_{C}=10 mVe ^{-t / \tau}

\text { The waveform for } v_{C} \text { appears in Fig. 24.32. }

\text { c. For the charging phase at } t=0 s , V_{R}=V \text { and } I_{R_{\max }}=V / R=10 mV / 5 k \Omega=2 \mu A \text { and }

i_{C}=I_{\max } e^{-t / \tau}=2 \mu A e^{-t / \tau}.

For the discharge phase, the current will have the same mathematical formulation but the opposite direction, as shown in Fig. 24.33.

24.32
24.33

Related Answered Questions

Question: 24.11

Verified Answer:

T=\frac{1}{f}=\frac{1}{10 kHz }=0.1 ms[/lat...
Question: 24.6

Verified Answer:

By the method in Section 13.7, G=\frac{\tex...
Question: 24.5

Verified Answer:

T=(2.6 \text { div. })(10 \mu s / \text { d...