The symmetrical plane rigid jointed frame 1234567, shown in Fig. P.6.4, is fixed to rigid supports at 1 and 5 and supported by rollers inclined at 45° to the horizontal at nodes 3 and 7. It carries a vertical point load P at node 4 and a uniformly distributed load w per unit length on the span 26.

Question

The symmetrical plane rigid jointed frame 1234567, shown in Fig. P.6.4, is fixed to rigid supports at 1 and 5 and supported by rollers inclined at 45° to the horizontal at nodes 3 and 7. It carries a vertical point load P at node 4 and a uniformly distributed load w per unit length on the span 26. Assuming the same flexural rigidity EI for all members, set up the stiffness equations which, when solved, give the nodal displacements of the frame. Explain how the member forces can be obtained.

Accepted Answer

The uniformly distributed load on the member 26 is equivalent to concentrated loads of wl/4 at nodes 2 and 6 together with a concentrated load of wl/2 at node 4. Thus, referring to Fig. P.6.4 and Fig. 6.3

[latex]\begin{array}{lcccccc} ext { Member } & 12 & 23 & 24 & 46 & 56 & 67 \ ext { Length } & l & l & l / 2 & l / 2 & l & l \\lambda(\cos heta) & 0 & -1 / \sqrt{2} & 1 & 1 & 0 & 1 / \sqrt{2} \\mu(\sin heta) & 1 & 1 / \sqrt{2} & 0 & 0 & 1 & 1 / \sqrt{2}\end{array}[/latex]

From Eq. (6.47) and using the alternative form of Eq. (6.44)

[latex]\left[K_{i j} ight]=E I\left[\begin{array}{cccccc}12 \mu^2 / L^3 & & & & & ext { SYM } \-12 \lambda \mu / L^3 & 12 \lambda^2 / L^3 & & & \6 \mu / L^2 & -6 \lambda / L^2 & 4 / L & & & \-12 \mu^2 / L^3& 12 \lambda \mu / L^3 & -6 \mu / L^2 & 12 \mu^2 / L^3 & & \12 \lambda \mu / L^3 & -12 \lambda^2 / L^3 & 6 \lambda / L^2 & -12\lambda \mu / L^3 & 12 \lambda^2 / L^3 & \6 \mu / L^2 & -6 \lambda / L^2 & 2 / L & 6 \mu / L^2 & 6 \lambda / L^2 & 4 \lambda / L\end{array} ight][/latex] (6.47)

[latex]\left\{\begin{array}{l}F_{y, i} \M_i \F_{y, j} \M_j\end{array} ight\}=E I\left[\begin{array}{cccc}12 / L^3 & -6 / L^2 & -12 / L^3 & -6 / L^2 \-6 / L^2 & 4 / L & 6 / L^2 & 2 / L \-12 / L^3 & 6 / L^2 & 12 / L^3 & 6 / L^2 \-6 / L^2 & 2 / L & 6 / L^2 & 4 / L\end{array} ight]\left\{\begin{array}{c}v_i \ heta_i \v_j \ heta_j\end{array} ight\}[/latex] (6.44)

[latex]\begin{aligned}&\left[K_{12} ight]=\frac{E I}{l^3}\left[\begin{array}{cccccc}12 & & & & & ext { SYM } \0 & 0 & & & & \6 & 0 & 4 & & & \-12 & 0 & -6 & 12 & & \0 & 0 & 0 & 0 & 0 & \6 & 0 & 2 & 6 & 0 & 0\end{array} ight]\&\left[K_{23} ight]=\frac{E I}{l^3}\left[\begin{array}{cccccc}6 & & & & & ext { SYM } \6 & 6 & & & & \6 / \sqrt{2} & 6 / \sqrt{2} & 4 & & & \6 & 6 & -6 \sqrt{2} & 6 & & \-6 & -6 & -6 / \sqrt{2} & 6 & 6 & \6 / \sqrt{2} & 6 / \sqrt{2} & 2 & 6 / \sqrt{2} & -6 / \sqrt{2} & -4 / \sqrt{2}\end{array} ight]\&\left[K_{24} ight]=\left[K_{46} ight]=\frac{E I}{l^3}\left[\begin{array}{cccccc}0 & & & & & ext { SYM } \0 & 96 & & & & \0 & -24 & 8 & & & \0 & 0 & 0 & 0 & & \0 & -96 & 24 & 0 & 96 & \0 & -24 & 4 & 0 & 24 & 8\end{array} ight]\end{aligned}[/latex]

[latex]\begin{aligned}&\left[K_{56} ight]=\frac{E I}{l^3}\left[\begin{array}{cccccc}12 & & & & & & ext { SYM } \0 & 0 & & & & \6 & 0 & 4 & & & \-12 & 0 & -6 & 12 & & \0 & 0 & 0 & 0 & 0 & \6 & 0 & 2 & 6 & 0 & 0\end{array} ight]\&\left[K_{67} ight]=\frac{E I}{l^3}\left[\begin{array}{cccccc}6 & & & & & ext { SYM } \-6 & 6 & & & & \6 / \sqrt{2} & -6 / \sqrt{2} & 4 & & & \-6 & 6 & -6 / \sqrt{2} & 6 & & \6 & -6 & 6 / \sqrt{2} & -6 & 6 & \6 / \sqrt{2} & -6 / \sqrt{2} & 2 & 6 / \sqrt{2} & 6 / \sqrt{2} & 4 / \sqrt{2}\end{array} ight]\end{aligned}[/latex]

The member stiffness matrices are then assembled into a 21 × 21 symmetrical matrix using the method described in Example 6.1. The known nodal displacements are [latex]u_1=v_1= heta_1=u_5=v_5= heta_5=u_2=u_4=u_6= heta_3= heta_7=0[/latex] and the support reactions are obtained from {F} = [K]{δ}. Having obtained the support reactions the internal shear force and bending moment distributions in each member follow (see Example 6.2).

Question p.6.4: The symmetrical plane rigid jointed frame 1234567, shown in ...

Related Answered Questions

The following interpolation formula is suggested as a displacement function for deriving the stiffness of a plane stress rectangular element of uniform thickness t shown in Fig. P.6.14. ...

Verified Answer:

A constant strain triangular element has corners 1(0,0), 2(4,0) and 3(2,2) and is 1 unit thick. If the elasticity matrix [D] has elements D11 = D22 = a, D12 = D1 = b, D13 = D23 = D31 = D32 = 0 and D33 = c derive the stiffness matrix for the element. ...

Verified Answer:

Verified Answer:

Verified Answer:

It is required to form the stiffness matrix of a triangular element 123 for use in stress analysis problems. The coordinates of the element are (1, 1), (2, 1), and (2, 2), respectively. (a) Assume a suitable displacement field explaining the reasons for your choice. (b) Form the [B] matrix. ...

Verified Answer:

It is required to formulate the stiffness of a triangular element 123 with coordinates (0, 0), (a, 0), and (0, a), respectively, to be used for ‘plane stress’ problems. (a) Form the [B] matrix. (b) Obtain the stiffness matrix [K^e]. Why, in general, is a finite element solution not an exact ...

Verified Answer:

The symmetrical rigid jointed grillage shown in Fig. P.6.7 is encastré at 6, 7, 8 and 9 and rests on simple supports at 1, 2, 4 and 5. It is loaded with a vertical point load P at 3. Use the stiffness method to find the displacements of the structure and hence calculate the support reactions ...

Verified Answer:

Given that the force–displacement (stiffness) relationship for the beam element shown in Fig. P.6.6(a) may be expressed in the following form: ...

Verified Answer:

The frame shown in Fig. P.6.5 has the planes xz and yz as planes of symmetry. The nodal coordinates of one quarter of the frame are given in Table P.6.5(i). In this structure the deformation of each member is due to a single effect, this being axial, bending or torsional. The mode of deformation ...

Verified Answer:

Form the matrices required to solve completely the plane truss shown in Fig. P.6.3 and determine the force in member 24. All members have equal axial rigidity. ...

Verified Answer: