THREE-WAY LIGHTBULBS Figure 18.11 illustrates how a three-way lightbulb is constructed to provide three levels of light intensity. The socket of the lamp is equipped with a three-way switch for selecting different light intensities. The bulb contains two filaments. Why are the filaments connected

Question

THREE-WAY LIGHTBULBS

Figure 18.11 illustrates how a three-way lightbulb is constructed to provide three levels of light intensity. The socket of the lamp is equipped with a three-way switch for selecting different light intensities. The bulb contains two filaments. Why are the filaments connected in parallel? Explain how the two filaments are used to provide the three different light intensities.

Accepted Answer

If the filaments were connected in series and one of them were to fail, there would be no current in the bulb and the bulb would not glow, regardless of the position of the switch. When the filaments are connected in parallel and one of them (say, the 75-W filament) fails, however, the bulb will still operate in one of the switch positions because there is current in the other (100-W) filament. The three light intensities are made possible by selecting one of three values of filament resistance, using a single value of [latex]120 \mathrm{~V}[/latex] for the applied voltage. The 75 -W filament offers one value of resistance, the 100 -W filament offers a second value, and the third resistance is obtained by combining the two filaments in parallel. When switch [latex]\mathrm{S}_{1}[/latex] is closed and switch [latex]\mathrm{S}_{2}[/latex] is opened, only the 75 -W filament carries current. When switch [latex]\mathrm{S}_{1}[/latex] is opened and switch [latex]\mathrm{S}_{2}[/latex] is closed, only the 100 -W filament carries current. When both switches are closed, both filaments carry current and a total illumination corresponding to [latex]175 \mathrm{~W}[/latex] is obtained.

Question 18.AP.3: THREE-WAY LIGHTBULBS Figure 18.11 illustrates how a three-wa...

Related Answered Questions

TIMED WINDSHIELD WIPERS Many automobiles are equipped with windshield wipers that can be used intermittently during a light rainfall. How does the operation of this feature depend on the charging and discharging of a capacitor? ...

Verified Answer:

DISCHARGING A CAPACITOR IN AN RC CIRCUIT GOAL Calculate some elementary properties of a discharging capacitor in an RC circuit. PROBLEM Consider a capacitor C being discharged through a resistor R as in Figure 18.18. (a) How long does it take the charge on the capacitor to drop to one-fourth its ...

Verified Answer:

Verified Answer:

ROADWAY FLASHERS Many roadway construction sites have flashing yellow lights to warn motorists of possible dangers. What causes the lights to flash? ...

Verified Answer:

Verified Answer:

Verified Answer:

Verified Answer:

Verified Answer:

LIGHTBULB COMBINATIONS Compare the brightness of the four identical lightbulbs shown in Figure 18.10. What happens if bulb A fails and so cannot conduct current? What if C fails? What if D fails? ...

Verified Answer:

Verified Answer: