Question 1.10: Two point charges of 2 microfarad and −4 µF each are placed ...

Basic Electrical and Electronics Engineering-II

Two point charges of 2 microfarad and −4 µF each are placed at a distance of 1m from each other on a straight line. Determine at what point the potential will be zero.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 1.12

Calculate the energy stored in a parallel plate capacitor, which consists of two metal plates of 64 cm² separated by a dielectric 1 mm thick with µr= 4.0. A potential difference of 1 kV is applied across it. What amount of heat will be produced when the charged capacitor is ...

Verified Answer:

Given ,

A = 64 cm^{2} = 64 × 10^{−4} m...

Question: 1.18

Calculate the electric field strength at a distance of 50 cm from a point charge of 1 × 10^−6 coulomb placed in air. ...

Verified Answer:

The electric field intensity or electric field str...

Question: 1.22

Two point charges Q1= + 2× 10^−8 C and Q2 = −3× 10^−8 C are separated from each other by 2 m. Determine the electric field at the mid- point between the two charges. ...

Verified Answer:

The electric field at point P, which is at a dista...

Question: 1.20

Two positive charges of magnitude 1 × 10^−6 coulomb are placed in air at a distance of 2 m from each other. Calculate the potential at a point P which is 1 m above the middle of the distance between the charges. ...

Verified Answer:

Work done per unit charge is called the potential....

Question: 1.17

Three point charges of magnitude Q = 1 × 10^−6 coulombs are located in the three corners of an equilateral triangle of side 1 m. Find the force on one charge due to the other two charges. ...

Verified Answer:

There will be a force of repulsion on charge [late...

Question: 1.11

A co-axial cable with a central core of 2 mm diameter passes through the centre of a cylinder made of dielectric material diameter 5 mm. The dielectric cylinder is coated from outside with a conducting sheath. The outer conducting sheath is at ground potential. Calculate the capacitance of the ...

Verified Answer:

The electric field at a point with a distance r fr...

Question: 1.9

A ring of inner diameter R and outer diameter R + 2 in the x−y plane with z = 0, has uniform surface charge density ρs . Calculate the potential at the centre of the ring. ...

Verified Answer:

Let ds be a differential surface area on the ring....

Question: 1.4

Three charges of 5 × 10^−9 C each are placed on the three corners of a rectangle ABCD. Calculate the potential at the fourth corner point of the rectangle. The sides of the rectangle are given as AB = CD = 4 m and BC = DA = 3 m. The medium is air. ...

Verified Answer:

Let the charges be placed at A, B, and C as shown....

Question: 1.3

Three charges of 3 × 10^−9 C each are placed in the three corners of an equilateral triangle of side 3 m. Calculate the potential at the centroid of the triangle. ...

Verified Answer:

The distance of point P at the centroid of the tri...

Question: 1.2

Four charges Q1 , Q2 , Q3 and Q4 are placed on the four corners of a square of side 1m. Calculate the potential at the centre of the square. The values of the charges are given as Q1 = 1.0 × 10^−9 C, Q2 = 2 × 10^−9 C, Q3 = 3 × 10^−9 C and Q4 = 4 × 10^−9 C. The charges are placed in air. ...

Verified Answer:

Distance BD =

\sqrt{1^{2}+1^{2}} =\sqrt{2}[/...