Question 14.AP.4: WHY ARE INSTRUMENTS WARMED UP? Why do the strings go flat an...

College Physics

WHY ARE INSTRUMENTS WARMED UP?

Why do the strings go flat and the wind instruments go sharp during a performance if an orchestra doesn’t warm up beforehand?

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 14.AP.6

WHY DOES THE PROFESSOR SOUND LIKE DONALD DUCK? A professor performs a demonstration in which he breathes helium and then speaks with a comical voice. One student explains, “The velocity of sound in helium is higher than in air, so the fundamental frequency of the standing waves in the mouth is ...

Verified Answer:

The second student is correct. The fundamental fre...

Question: 14.11

SOUR NOTES GOAL Apply the beat frequency concept. PROBLEM A certain piano string is supposed to vibrate at a frequency of 4.40×10² Hz. To check its frequency, a tuning fork known to vibrate at a frequency of 4.40×10² Hz is sounded at the same time the piano key is struck, and a beat frequency of ...

Verified Answer:

(a) Find the two possible frequencies. Case [latex...

Question: 14.10

RESONANCE IN A TUBE OF VARIABLE LENGTH GOAL Understand resonance in tubes and perform elementary calculations. PROBLEM Figure 14.25a shows a simple apparatus for demonstrating resonance in a tube. A long tube open at both ends is partially sub merged in a beaker of water, and a vibrating tuning ...

Verified Answer:

(a) Find the frequency of the tuning fork. Substit...

Question: 14.9

HARMONICS OF A PIPE GOAL Find frequencies of open and closed pipes. PROBLEM A pipe is 2.46 m long. (a) Determine the frequencies of the first three harmonics if the pipe is open at both ends. Take 343 m/s as the speed of sound in air. (b) How many harmonic frequencies of this pipe lie in the ...

Verified Answer:

(a) Find the frequencies if the pipe is open at bo...

Question: 14.AP.5

HOW DO BUGLES WORK? A bugle has no valves, keys, slides, or finger holes. How can it be used to play a song? ...

Verified Answer:

Songs for the bugle are limited to harmonics of th...

Question: 14.AP.3

OSCILLATIONS IN A HARBOR Why do passing ocean waves sometimes cause the water in a harbor to undergo very large oscillations, called a seiche (pronounced saysh)? ...

Verified Answer:

Water in a harbor is enclosed and possesses a natu...

Question: 14.8

HARMONICS OF A STRETCHED WIRE GOAL Calculate string harmonics, relate them to sound, and combine them with tensile stress. PROBLEM (a) Find the frequencies of the fundamental, second, and third harmonics of a steel wire 1.00 m long with a mass per unit length of 2.00×10^-3 kg/m and under a ten sion ...

Verified Answer:

(a) Find the first three harmonics at the given te...

Question: 14.1

EXPLOSION OVER AN ICE SHEET GOAL Calculate time of travel for sound through various media. PROBLEM An explosion occurs 275 m above an 867-m-thick ice sheet that lies over ocean water. If the air temperature is −7.00∘C, how long does it take the sound to reach a research vessel 1250 m below the ice? ...

Verified Answer:

Calculate the speed of sound in air at

-7.0...

Question: 14.AP.1

THE SOUNDS HEARD DURING A STORM How does lightning produce thunder, and what causes the extended rumble? ...

Verified Answer:

Assume you’re at ground level, and neglect ground ...

Question: 14.2

A NOISY GRINDING MACHINE GOAL Working with watts and decibels. PROBLEM A noisy grinding machine in a factory produces a sound intensity of 1.00×10^−5 W/m² at a certain loca tion. Calculate (a) the decibel level of this machine at that point and (b) the new intensity level when a second, identical ...

Verified Answer:

(a) Calculate the intensity level of the single gr...