In the previous example, the switching on of a battery created a step function, a pulse of infinite width. In this example, the pulse is of finite width of 5\mu s. We first calculate the voltage reflection coefficients:
\Gamma_{G}=\frac{Z_{g}-Z_{o}}{Z_{g}+Z_{o}}=\frac{25-75}{25+75}=\frac{-1}{2}
\Gamma_{L}=\frac{Z_{L}-Z_{o}}{Z_{L}+Z_{o}}=\frac{100-75}{100+75}=\frac{1}{7}
The initial voltage and transit time are given by
V_{o}=\frac{Z_{o}}{Z_{o}+Z_{g}}V_{g}=\frac{75}{100}(4)=3V
t_{1}=\frac{\ell}{u}=\frac{60}{0.1(3\times10^{8})}=2\mu s
The time taken by V_{o} to go forth and back is 2t_{1}=4\mu s, which is less than the pulse duration of 5\mu s. Hence, there will be overlapping.
The current reflection coefficients are
-\Gamma_{L}=-\frac{1}{7} and -\Gamma_{G}=\frac{1}{2}
The initial current
I_{o}=\frac{V_{g}}{Z_{g}+Z_{o}}=\frac{4}{100}=40mA
Let i and r denote incident and reflected pulses, respectively. At the generator end:
0\lt t\lt5\mu s, I_{r}=I_{o}=40mA
4\lt t\lt 9, I_{i}=-\frac{1}{7}(40)=-5.714
I_{r}=\frac{1}{2}(-5.714)=-2.857
8\lt t\lt 13, I_{i}=-\frac{1}{7}(-2.857)=0.4082
I_{r}=\frac{1}{2}(0.4082)=0.2041
12\lt t\lt 17, I_{i}=-\frac{1}{7}(0.2041)=-0.0292
I_{r}=\frac{1}{2}(-0.0292)=-0.0146
and so on. Hence, the plot of I(0,t) versus t is as shown in Figure 11.35(a).
At the load end:
0\lt t\lt 2\mu s, V=0
2\lt t\lt 7, V_{i}=3
V_{r}=\frac{1}{7}(3)=0.4296
6\lt t\lt 11, V_{i}=-\frac{1}{2}(0.4296)=-0.2143
V_{r}=\frac{1}{7}(-0.2143)=-0.0306
10\lt t\lt 14, V_{i}=-\frac{1}{2}(-0.0306)=0.0154
V_{r}=\frac{1}{7}(0.0154)=0.0022
and so on. From V(\ell,t), we can obtain I(\ell,t) as
I(\ell,t)=\frac{V(\ell,t)}{Z_{L}}=\frac{V(\ell,t)}{100}
The plots of V(\ell,t) and I(\ell,t) are shown in Figure 11.35(b) and (c).