A high-pass filter with f_{c}= 2 kHz and a low-pass filter with f_{c} = 2.5 kHz are used to construct a band-pass filter. Assuming no loading effect, what is the bandwidth of the passband?
Question 18.7: A high-pass filter with fc = 2 kHz and a low-pass tiller wit...
BW=f_{c(l)}- f_{c(h)}= 2.5 \ kHz – 2 \ kHz = 500 \ Hz
Related Answered Questions
The critical frequency for this low-pass filter is...
The critical frequency for this low-pass filter is...
The critical frequency for this high-pass filter i...
(a) Determine the value of C as follows:
X_...
The center frequency of the filter is its resonant...
Recall from Chapter 17 (Eq. 17-13 : Z= \sqr...
Since X_{L} = X_{C} ...
The center frequency is
f_{0}= \frac{\sqrt{...
f_{c}= \frac{1}{2\pi RC}= \frac{1}{2\pi (10...