Holooly Plus Logo
Holooly Plus Logo

Question 13.27: A long copper wire, 10 mm in diameter, is stretched taut and...

A long copper wire, 10 mm in diameter, is stretched taut and is exposed to a wind at a velocity of 27.0 m/s normal to the wire. Compute the drag force per meter of length.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

For instantaneous closure of a valve in a pipeline, determine the increase in the pressure produced.

Verified Answer:
Let p′ equal the change in pressure due to the clo...

The 10 ft by 4 ft plate of Problem 13.44 is held in water (50°F) moving at 4 ft/sec parallel to its length. Assuming laminar conditions in the boundary layer at the leading edge of the plate, (a) locate where the boundary layer flow changes from laminar to turbulent, (b) estimate the thickness of

Verified Answer:
\text { (a) Reynolds number Re }=V L / v=(4...

A 3 ft by 4 ft plate moves at 44 ft/sec in still air at an angle of 12° with the horizontal. Using a coefficient of drag CD = 0.17 and a coefficient of lift CL = 0.72, determine (a) the resultant force exerted by the air on the plate, (b) the frictional force, and (c) the horsepower required to

Verified Answer:
\text { (a) Drag force }=C_{D}\left(\frac{\...

A flat plate, 1.2 m by 1.2 m, moves at 6.7 m/s normal to its plane. At standard pressure and 20°C air temperature, determine the resistance of the plate (a) moving through air (γ = 11.8 N/m^3) and (b) moving through water at 16°C.

Verified Answer:
\text { (a) Diagram } F \text { indicates }...

A 50-mph wind strikes a 6 ft by 8 ft sign normal to its surface. For a standard barometer, what force acts against the sign? (γ = 0.0752 lb/ft^3)

Verified Answer:
For a small jet of fluid striking a large plate at...

A rocket device burns its propellant at a rate of 0.0676 kN/s. The exhaust gases leave the rocket at a relative velocity of 980 m/s and at atmospheric pressure. The exhaust nozzle has an area of 0.032 m^2, and the gross weight of the rocket is 2.2 kN. At the given instant, 2000 kW is developed by

Verified Answer:
For a rocket, no air enters the device and the sec...

In Problem 13.21, what would be the gross thrust if the exit pressure becomes 10 psia and the Mach number is 1.00? (Use k = 1.33.)

Verified Answer:
In order to evaluate the exit velocity for the new...

Assuming that the drag force is a function of density, viscosity, elasticity, and velocity of the fluid and a characteristic area, show that the drag force is a function of the Mach number and the Reynolds number (see also Chapter 6, Problems 6.9 and 6.16).

Verified Answer:
As illustrated in Chapter 6, a dimensional analysi...

A turbojet engine is tested in the laboratory under conditions simulating an altitude where atmospheric pressure p = 785.3 psfa, temperature T = 429.5°R, and specific weight γ = 0.0343 lb/ft^3. If the exit area of the engine is 1.50 ft^2 and the exit pressure is atmospheric, what is the Mach number

Verified Answer:
Since in equation (B) of Problem 13.18, p_{...

A jet engine is being tested in the laboratory. The engine consumes 50 Ib of air per sec and 0.5 Ib of fuel per sec. If the exit velocity of the gases is 1500 ft/sec, what is the thrust?

Verified Answer:
Using formula (A) in Problem 13.18,      thrust F ...