Holooly Plus Logo
Holooly Plus Logo

Question 4.5.4: A rectangular waveguide with inner dimensions 6 cm x3 has be...

A rectangular waveguide with inner dimensions 6 cm x^{3} has been designed for a single mode operation. Find the possible frequency range of operation such that the lowest frequency is 5% above the cut-off and the highest frequency is 5% below the cutoff of the next higher mode.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

A rectangular hollow metal waveguide is required to be so designed to propagate a 9375 MHz signal in its TE 10-mode that the guide-wavelength equals the cut-off wavelength. Calculate the value of ‘a’ (breadth or the wider dimension of the waveguide). Take b = a/2. Also, calculate the cut-off freque

Verified Answer:
For rectangular waveguide. TE _{10} \text {...

A rectangular hollow metal wave guide of internal cross-section of 7.366 cm × 3.556 cm carries a 3 GHz signal in the TE10-mode. Calculate the maximum power handling capability of the waveguide assuming the maximum permissible electric field inside the waveguide to be 30 kV/vm.

Verified Answer:
\begin{aligned}f_{c} &=\frac{V}{2 a}=\f...

In an air-filled rectangular waveguide, the vector electric field is given by E→=cos(2π y) exp[-j(40π/3)z+jωt]i^ xV/m Find vector magnetic field and the phase velocity of the wave inside the waveguide.

Verified Answer:
\begin{aligned}\vec{E} &=\cos (2 x y) \...

The region between a pair of parallel perfectly conducting planes of infinite extent in the y and z direction is partially filled with a dielectric as shown in figure. A 30 GHz TE 10 wave is incident on the air dielectric interface as shown. Find VSWR at the interface.

Verified Answer:
Given, a = 5 cm TE _{10}, f=30 GHz ...

A 100 m section of an air-filled rectangular waveguide operating in the TE10mode has a cross-sectional dimension of 1.071 cm x 0.5 cm. Two pulsed carriers of 21 GHz and 28 GHz are simultaneously launched at one end of the waveguide section. What is the time delay difference between the two pulses a

Verified Answer:
Time delay  =T=\frac{\bar{\beta}}{\omega} z...

A rectangular hollow metal waveguide has dimensions a = 2.29 cm and b = 1.02 cm. Microwave power at 10 GHz is transmitted through the waveguide in the TE10 mode.(a) Calculate the cut-off wavelength and the guide wavelength for this mode. (b) What are the other (TE or TM) modes that can propagate

Verified Answer:
a = 2.29, b = 1.02 cm, c = 10 GHz (a) λ = 20 = 4.5...

Consider a parallel plate waveguide with plate separation d as shown in figure. The electric and magnetic fields for the TEM mode are given by Ex= E0 e^-jkz+jωt,Hy= E0/η e^-jkz+jωt Where k = T < one. (a) Determine the surface charge densities ρs on the plates at x = 0 and x = d. (b) Determine the

Verified Answer:
Given that wave is propagating in +2 direction. [l...

Which one of the following does represent the electric field lines for the TE 02 mode in the cross-section of a hollow rectangular metallic waveguide?

Verified Answer:
For the given figures. (a) TE _{10}...

The cut off frequency of a waveguide depends upon (a) The dimensions of waveguide (b) The dielectric property of the medium in the waveguide (c) The characteristic imoedance of the waveguide (d) The transverse and axial components of the fields

Verified Answer:
f_{c}=\frac{V_{o}}{2 \pi} \sqrt{\left(\frac...

Choose the correct statements For a wave propagating in an air filled rectangular wave guide (a) Guided wavelength is never less than the free space wavelength. (b) Wave impedance is never less than the free space impedance. (c) Phase velocity is never less than the free space velocity. (d) TEM mod

Verified Answer:
(i) \lambda_{ g } \text { [guided wavelengt...