Holooly Plus Logo
Holooly Plus Logo

Question 3.6: A three-phase Y-connected 60-Hz two-pole synchronous machine...

A three-phase Y-connected 60-Hz two-pole synchronous machine has a stator with 5000 turns of wire per phase. What rotor flux would be required to produce a terminal (line-to-line) voltage of 13.2 kV?

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

Develop a table showing the speed of magnetic field rotation in ac machines of 2, 4, 6, 8, 10, 12, and 14 poles operating at frequencies of 50, 60, and 400 Hz.

Verified Answer:
The equation relating the speed of magnetic field ...

The first ac power system in the USA ran at a frequency of 133 Hz. If the ac power for this system were produced by a 4-pole generator, how fast would the shaft of the generator have to rotate?

Verified Answer:
The equation for the speed of the shaft is ...

A three-phase Y-connected four-pole winding is installed in 24 slots on a stator. There are 40 turns of wire in each slot of the windings. All coils in each phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1800 r/min.

Verified Answer:
(a) The frequency of the voltage produced in this ...

A three-phase Δ-connected six-pole winding is installed in 36 slots on a stator. There are 150 turns of wire in each slot of the windings. All coils in each phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1000 r/min.

Verified Answer:
(a) The frequency of the voltage produced in this ...

If an ac machine has the rotor and stator magnetic fields shown in Figure P3-1, what is the direction of the induced torque in the machine? Is the machine acting as a motor or generator?

Verified Answer:
Since \mathbf{\tau} _{\text {ind }}=k \math...

In the early days of ac motor development, machine designers had great difficulty controlling the core losses (hysteresis and eddy currents) in machines. They had not yet developed steels with low hysteresis, and were not making laminations as thin as the ones used today. To help control these

Verified Answer:
(a) The equation relating the speed of magnetic fi...

In later years, motors improved and could be run directly from a 60 Hz power supply. As a result, 25 Hz power systems shrank and disappeared. However, there were many perfectly-good working 25 Hz motors in factories around the country that owners were not ready to discard. To keep them running,

Verified Answer:
From Equation (3-34), the speed of rotation of the...

The simple loop is rotating in a uniform magnetic field shown in Figure 3-1 has the following characteristics: B =1.0 T to the right r = 0.1 m l = 0.3 m ωm = 377 rad/s (a) Calculate the voltage etot(t) induced in this rotating loop. (b) What is the frequency of the voltage produced in this loop? (c)

Verified Answer:
(a) The induced voltage on a simple rotating loop ...

The flux density distribution over the surface of a two-pole stator of radius r and length l is given by B = BM cos(ωmt – α) (3-37b) Prove that the total flux under each pole face is Φ =2rl BM

Verified Answer:
The total flux under a pole face is given by the e...