Holooly Plus Logo
Holooly Plus Logo

Question 6.35: An inductor has a linear change in current from 50 mA to 100...

An inductor has a linear change in current from 50 mA to 100 mA in 2 ms and induces a voltage of 160 mV. Calculate the value of the inductor.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

An op amp integrator has R= 50 kΩ and C = 0.04 μF. If the input voltage is vi= 10 sin 50t mV, obtain the output voltage.

Verified Answer:
\mathrm{v}_{\mathrm{o}} =-\frac{1}{\mathrm...

The current through a 12-mH inductor is i(t)=30t e^-2t A, t ≥ 0 .Determine: (a) the voltage across the inductor, (b) the power being delivered to the inductor at t = 1 s, (c) the energy stored in the inductor at t = 1 s.

Verified Answer:
(a)  V=L \frac { di }{ dt }12 \mathrm{x}10^...

The switch in Fig. 6.86 has been in position A for a long time. At t = 0, the switch moves from position A to B. The switch is a make-before-break type so that there is no interruption in the inductor current. Find: (a) i(t) for t > 0, (b) v just after the switch has been moved to position B, (c)

Verified Answer:
(a)   When the switch is in position A, i= –6 = i(...

Obtain the Thèvenin equivalent at the terminals, a-b, of the circuit shown in Fig. 6.65. Please note that Thèvenin equivalent circuits do not generally exist for circuits involving capacitors and resistors. This is a special case where the Thèvenin equivalent circuit does exist.

Verified Answer:
Because this is a totally capacitive circuit, we c...

The current through a 10-mH inductor is 6 e^-t/2 /2 A. Find the voltage and the power at t = 3 s.

Verified Answer:
i = 6{ e}^{ -t/2} \begin{arr...

Consider the circuit in Fig. 6.83. Find: (a) Leq, i1(t) and i2(t) if is =3e^-t mA , (b) vo(t), (c) energy stored in the 20-mH inductor at t=1s.

Verified Answer:
(a)    L_{e q}=20 / /(4+6)=20 \times 10 / 3...

The current waveform in Fig. 6.80 flows through a 3-H inductor. Sketch the voltage across the inductor over the interval 0 < t < 6 s.

Verified Answer:
v=\mathrm{L} \frac{\mathrm{di}}{\mathrm{dt}...

(a) For two inductors in series as in Fig. 6.81(a), show that the current-division principle is v1= L1/L1+L2 vs, v2= L2/L1+L2 vs assuming that the initial conditions are zero. (b) For two inductors in parallel as in Fig. 6.81(b), show that the current-division principle is i1= L2/L1+L2 is,

Verified Answer:
(a)      \mathrm{v}_{\mathrm{s}}=\left(\mat...

In the circuit of Fig. 6.82, io(0) = 2 A. Determine io(t) and vo(t)  for t > 0.

Verified Answer:
L_{e q}=3 / / 5=\frac{15}{8}  ...

The current through a 40-mH inductor is i(t)= 0, t0 . Find the voltage v(t).

Verified Answer:
\begin{aligned}\mathrm{v}=\mathrm{L} \frac{...