Holooly Plus Logo
Holooly Plus Logo

Question 5.86: Assuming a gain of 200 for an IA, find its output voltage fo...

Assuming a gain of 200 for an IA, find its output voltage for:

(a) { V }_{ 1 } = 0.402 V and { V }_{ 2 }= 0.386 V

(b) { V }_{ 1 } = 1.002 V and { V }_{ 2 } = 1.011 V.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

A voltage-to-current converter is shown in Fig. 5.110, which means that iL = A vi if R1R2= R3R4. Find the constant term A.

Verified Answer:
At node a, \begin{array}{l}\left(\mathrm{V}...

Refer to the bridge amplifier shown in Fig. 5.109. Determine the voltage gain V0/Vi

Verified Answer:
The top op amp circuit is a non-inverter, while th...

A noninverting current amplifier is portrayed in Fig. 5.108. Calculate the gain i0/is. Take R1 = 8 kΩ and R2 = 1 kΩ.

Verified Answer:
{ i }_{ 0 } ={ i }_{ 1 } + { i }_{ 2 } [/la...

The op amp circuit in Fig. 5.107 is a current amplifier. Find the current gain i0/is of the amplifier.

Verified Answer:
Transforming the current source to a voltage sourc...

Design a circuit that provides a relationship between output voltage V0 and input voltage Vs such that V0 = 12 Vs – 10. Two op amps, a 6-V battery and several resistors are available

Verified Answer:
A summer with { V }_{0 } = –{ V }_{ 1 } – (...

Figure 5.106 shows an instrumentation amplifier driven by a bridge. Obtain the gain V0/Vi of the amplifier.

Verified Answer:
We need to find { V }_{ Th } at ter...

Figure 5.105 displays a two-op-amp instrumentation amplifier. Derive an expression for V0 in terms of V1 and V2. How can this amplifier be used as a subtractor?

Verified Answer:
The output, { V }_{ a }, of the fir...

In the op amp circuit of Fig. 5.104, find the value of R so that the power absorbed by the 10-kΩ resistor is 10 mW. Take Vs = 2V.

Verified Answer:
This is a noninverting amplifier. { V }_{ 0...

A four-bit R-2R ladder DAC is presented in Fig. 5.103. (a) Show that the output voltage is given by -Vo = Rf ( V1/2 R + V2/4 R + V3/8 R + V4/16 R ) (b) If Rf = 12 kΩ and R = 10 kΩ, find | V0 | for [V1 V2 V3 V4] = [1 0 1 1] and [V1 V2 V3 V4] = [0 1 0 1].

Verified Answer:
For (a), the process of the proof is time consumin...

Design a six-bit digital-to-analog converter. (a) If |Vo|=1.1875 V is desired, what should [V1 V2 V3 V4 V5 V6 ]be?(b) Calculate |Vo| if [V1 V2 V3 V4 V5 V6]=[011011](c) What is the maximum value |Vo| can assume?

Verified Answer: