Holooly Plus Logo
Holooly Plus Logo

Question 5.4: Finding the Currents of a Step-up Dc Converter The step-up c...

Finding the Currents of a Step-up Dc Converter

The step-up converter in Figure 5.9a has V_s = 10 V, f = 1  kHz, R = 5  Ω, L = 6.5 mH, E = 0 V, and k = 0.5. Find I_1, I_2 and ΔI. Use SPICE to find these values and plot the load, diode, and switch current.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

Finding the Currents and Voltage in the Buck–Boost Regulator The buck–boost regulator in Figure 5.19a has an input voltage of Vs = 12 V. The duty cycle k = 0.25 and the switching frequency is 25 kHz. The inductance L = 150 µH and filter capacitance C = 220 µF. The average load current Ia = 1.25 A

Verified Answer:
V_s = 12 V, k = 0.25, I_a = 1.25  A, f = 25...

Finding the Currents and Voltage in the Boost Regulator A boost regulator in Figure 5.18a has an input voltage of Vs = 5 V. The average output voltage Va = 15 V and the average load current Ia = 0.5 A. The switching frequency is 25 kHz. If L = 150 µH and C = 220 µF, determine (a) the duty cycle k,

Verified Answer:
V_s = 5  V, V_a = 15  V, f = 25  kHz, L = 1...

Finding the Values of LC Filter for the Buck Regulator The buck regulator in Figure 5.17a has an input voltage of Vs = 12 V. The required average output voltage is Va = 5 V at R = 500 Ω and the peak-to-peak output ripple voltage is 20 mV. The switching frequency is 25 kHz. If the peak-to-peak

Verified Answer:
V_s = 12  V, ΔV_c = 20 mV, ΔI - 0.8 A, f = ...

A buck converter is shown in Figure 5.40. The input voltage is Vs = 110 V, the average load voltage is Va = 60 V, and the average load current is Ia = 20 A. The chopping frequency is f = 20 kHz. The peak-to-peak ripples are 2.5% for load voltage, 5% for load current, and 10% for filter Le current.

Verified Answer:
V_s = 110 V, V_a = 60 V, I_a = 20 A...

Finding the Harmonic Input Current of a Dc Converter A highly inductive load is supplied by a converter as shown in Figure 5.37a. The average load current is Ia = 100 A and the load ripple current can be considered negligible (ΔI = 0) . A simple LC input filter with Le = 0.3 mH and Ce = 4500 µF

Verified Answer:
For I_a = 100 A, f = 350 Hz, k = 0.50, C_e ...

Finding the Currents and Voltages in the Cúk Regulator The input voltage of a Cúk converter in Figure 5.20a is Vs = 12 V. The duty cycle is k = 0.25 and the switching frequency is 25 kHz. The filter inductance is L2 = 150 µH and filter capacitance is C2 = 220 µF. The energy transfer

Verified Answer:
V_s = 12 V, k = 0.25, I_a = 1.25 A, f = 25 ...

Finding the Load Inductance to Limit the Load Ripple Current The converter in Figure 5.4 has a load resistance R = 0.25 , input voltage Vs = 550 V, and battery voltage E = 0 V. The average load current Ia = 200 A and chopping frequency f = 250 Hz. Use the average output voltage to calculate

Verified Answer:
V_s = 550  V, R = 0.25  Ω, E...

Finding the Currents of a Dc Converter with an RL Load A converter is feeding an RL load as shown in Figure 5.4 with Vs = 220 V, R = 5 , L = 7.5 mH, f = 1 kHz, k = 0.5, and E = 0 V. Calculate (a) the minimum instantaneous load current I1, (b) the peak instantaneous load current I2,

Verified Answer:
V_s = 220 V, R = 5  Ω , L = 7.5  mH, E = 0 ...

inding the Performances of a Dc–Dc Converter The dc converter in Figure 5.2a has a resistive load of R = 10 and the input voltage is Vs = 220 V. When the converter switch remains on, its voltage drop is v ch = 2 V and the chopping frequency is f = 1 kHz. If the duty cycle is 50%, determine

Verified Answer:
V_s = 220 V, k = 0.5, R = 10 , and ...