Holooly Plus Logo
Holooly Plus Logo

Question 6.7: (a) Calculate and plot the torque-speed characteristic of th...

(a) Calculate and plot the torque-speed characteristic of the motor in Problem 6-5. (b) Calculate and plot the output power versus speed curve of the motor in Problem 6-5.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

The 'Blue Check Mark' means that either the MATLAB code/script/answer provided in the answer section has been tested by our team of experts; or the answer in general has be fact checked.

Learn more on how do we answer questions.

This Question has a MATLAB Verified Solution/Answer as well.

Subscribe

Already have an account?

Login

Related Answered Questions

A 220-V three-phase six-pole 50-Hz induction motor is running at a slip of 3.5 percent. Find: (a) The speed of the magnetic fields in revolutions per minute (b) The speed of the rotor in revolutions per minute (c) The slip speed of the rotor (d) The rotor frequency in hertz

Verified Answer:
(a) The speed of the magnetic fields is n_{...

Answer the questions in Problem 6-1 for a 480-V three-phase two-pole 60-Hz induction motor running at a slip of 0.025.

Verified Answer:
(a) The speed of the magnetic fields is n_{...

A three-phase 60-Hz induction motor runs at 715 r/min at no load and at 670 r/min at full load.(a) How many poles does this motor have?(b) What is the slip at rated load?(c) What is the speed at one-quarter of the rated load?(d) What is the rotor’s electrical frequency at one-quarter of the rated

Verified Answer:
(a) This machine has 10 poles, which produces a sy...

A three-phase 60-Hz two-pole induction motor runs at a no-load speed of 3580 r/min and a full-load speed of 3440 r/min. Calculate the slip and the electrical frequency of the rotor at no-load and full-load conditions. What is the speed regulation of this motor [Equation (3-68)]?

Verified Answer:
The synchronous speed of this machine is 3600 r/mi...

The power crossing the air gap of a 60 Hz, four-pole induction motor is 25 kW, and the power converted from electrical to mechanical form in the motor is 23.2 kW. (a) What is the slip of the motor at this time? (b) What is the induced torque in this motor? (c) Assuming that the mechanical losses

Verified Answer:
(a) The synchronous speed of this motor is ...

Figure 6-18a shows a simple circuit consisting of a voltage source, a resistor, and two reactances. Find the Thevenin equivalent voltage and impedance of this circuit at the terminals. Then derive the expressions for the magnitude of VTH and for RTH given in Equations (6-41b) and (6-44)

Verified Answer:
The Thevenin voltage of this circuit is \ma...

A 460-V 50-hp six-pole Δ-connected 60-Hz three-phase induction motor has a full-load slip of 4 percent, an efficiency of 91 percent, and a power factor of 0.87 lagging. At start-up, the motor develops 1.75 times the full-load torque but draws 7 times the rated current at the rated voltage. This

Verified Answer:
(a) The starting torque of an induction motor is p...

A 50-kW, 460-V, 50-Hz, two-pole induction motor has a slip of 5 percent when operating a full-load conditions. At full-load conditions, the friction and windage losses are 700 W, and the core losses are 600 W. Find the following values for full-load conditions: (a) The shaft speed nm (b) The output

Verified Answer:
(a) The synchronous speed of this machine is [late...

A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp.Its equivalent circuit components are R1 = 0.100 Ω R2 = 0.070 Ω XM = 10.0 Ω X1 = 0.210 Ω X2 = 0.210 Ω Pmech = 500 W Pmisc ≈ 0 Pcore = 400 W For a slip of 0.05, find (a) The line current IL (b) The stator copper losses

Verified Answer:
The equivalent circuit of this induction motor is ...

For the motor in Problem 6-5, what is the slip at the pullout torque? What is the pullout torque of this motor?

Verified Answer:
The slip at pullout torque is found by calculating...