For the step function v_{s}= u(t), use PSpice to find the response v(t) for 0 < t < 6 s in the circuit of Fig. 8.113.
Question 8.68: For the step function vs= u(t), use PSpice to find the respo...
The schematic is as shown below. The unit step is modeled by VPWL as shown. We insert a voltage marker to display V after simulation. We set Print Step = 25 ms and final step = 6s in the transient box. The output plot is shown below.
Related Answered Questions
For t = 0-, v(0) = 0.
For t > 0, the circuit is...
The schematic is shown below. We use VPWL and IPWL...
The dual is constructed in Figure (a) and redrawn ...
The dual is obtained from the original circuit as ...
The dual circuit is connected as shown in Figure (...
\alpha=300=\frac{1}{2 R C} (1)[/latex...
Let i= inductor current and v= capacitor voltage.
...
For t = 0-, 4u(t) = 0, v(0) = 0, and i(0) = 30/10 ...
For \mathrm{t}=0^{-}, \mathrm{i}(0)=3+12 / ...