Holooly Plus Logo
Holooly Plus Logo

Question 27.WI.7: What if the heater were accidentally connected to a 240-V su...

What if the heater were accidentally connected to a 240-V supply? (This is difficult to do because the shape and orientation of the metal contacts in 240-V plugs are different from those in 120-V plugs.) How would this affect the current carried by the heater and the power rating of the heater?

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

Calculate the resistance of an aluminum cylinder that has a length of 10.0 cm and a cross-sectional area of 2.00 × 10^-4 m^2. Repeat the calculation for a cylinder of the same dimensions and made of glass having a resistivity of 3.0 × 10^10 Ωm.

Verified Answer:
From Equation 27.11 and Table 27.1, we can calcula...

(A) Calculate the resistance per unit length of a 22-gauge Nichrome wire, which has a radius of 0.321 mm. (B) If a potential difference of 10 V is maintained across a 1.0-m length of the Nichrome wire, what is the current in the wire?

Verified Answer:
The cross-sectional area of this wire is A...

Coaxial cables are used extensively for cable television and other electronic applications. A coaxial cable consists of two concentric cylindrical conductors. The region between the conductors is completely filled with silicon, as shown in Figure 27.8a, and current leakage through the silicon,

Verified Answer:
Conceptualize by imagining two currents, as sugges...

Suppose the coaxial cable is enlarged to twice the overall diameter with two possibilities: (1) the ratio b/a is held fixed, or (2) the difference b – a is held fixed. For which possibility does the leakage current between the inner and outer conductors increase when the voltage is applied between

Verified Answer:
In order for the current to increase, the resistan...

(A) Using the data and results from Example 27.1 and the classical model of electron conduction, estimate the average time interval between collisions for electrons in household copper wiring. (B) Assuming that the average speed for free electrons in copper is 1.6 × 10^6 m/s and using the result

Verified Answer:
From Equation 27.17, we see that \rho=\fra...

A resistance thermometer, which measures temperature by measuring the change in resistance of a conductor, is made from platinum and has a resistance of 50.0 Ω at 20.0°C. When immersed in a vessel containing melting indium, its resistance increases to 76.8 Ω. Calculate the melting point of the

Verified Answer:
Solving Equation 27.21 for ΔT and using the α valu...

An electric heater is constructed by applying a potential difference of 120 V to a Nichrome wire that has a total resistance of 8.00 Ω. Find the current carried by the wire and the power rating of the heater.

Verified Answer:
\text { Because } \Delta V=I R, \text { we...

(A) What is the required resistance of an immersion heater that will increase the temperature of 1.50 kg of water from 10.0°C to 50.0°C in 10.0 min while operating at 110 V? (B) Estimate the cost of heating the water.

Verified Answer:
This example allows us to link our new understandi...

In a certain particle accelerator, electrons emerge with an energy of 40.0 MeV (1 MeV = 1.60 × 10^-13 J). The electrons emerge not in a steady stream but rather in pulses at the rate of 250 pulses/s. This corresponds to a time interval between pulses of 4.00 ms (Fig. 27.16). Each pulse has a

Verified Answer:
We use Equation 27.2 in the form dQ = I dt and int...

What if the requested quantity in part (C) were the average power rather than the peak power?

Verified Answer:
Instead of Equation (1), we would use the time int...