Holooly Plus Logo
Holooly Plus Logo

Question 3.RQ.5: What is the most common use of the Final Value Theorem in co...

What is the most common use of the Final Value Theorem in control?

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

Stability Versus Two Parameter Ranges Find the range of the controller gains (K, KI) so that the PI (proportional-integral; see Chapter 4) feedback system in Fig. 3.39 is stable.

Verified Answer:
The characteristic equation of the closed-loop sys...

Aircraft Response Using MATLAB The transfer function between the elevator and altitude of the Boeing 747 aircraft described in Section 10.3.2 can be approximated as h(s)/δe(s) = 30(s − 6)/s(s^2 + 4s + 13). 1. Use MATLAB to plot the altitude time history for a 1° impulsive elevator input. Explain

Verified Answer:
1. The MATLAB statements to create the impulse res...

Satellite Transfer Function Using MATLAB 1. Find the transfer function between the input Fc and the satellite attitude θ in Example 2.3 and 2. Determine the response of the system to a 25-N pulse of 0.1 sec duration, starting at t = 5 sec. Let d = 1 m and I = 5000 kg-m^2.

Verified Answer:
1. From Example 2.3, \frac{d}{ I} = \frac{...

Response versus Pole Locations, Real Roots Compare the time response with the pole locations for the system with a transfer function between input and output given by H(s) = 2s + 1/s^2 + 3s + 2.             (3.52)

Verified Answer:
The numerator is b(s) = 2 \left( s +\frac{...

Under what conditions might it be important to know how to estimate a transfer function from experimental data?

Verified Answer:
In many cases, the equations of motion are either ...

What is the main use of Routh’s criterion?

Verified Answer:
With this method, we can find (symbolically) the r...

Why is stability an important consideration in control system design?

Verified Answer:
Almost any useful dynamic system must be stable to...

What is the main effect of an extra real pole on the second-order step response?

Verified Answer:
A pole slows down the response and makes the rise ...

What is the major effect of an extra zero in the LHP on the second-order step response?

Verified Answer:
Such a zero causes additional overshoot, and the c...

What is the most noticeable effect of a zero in the RHP on the step response of the second-order system?

Verified Answer:
Such a zero often causes an initial undershoot of ...