Question D.4: Assuming that i(0) = 10 A, plot the zero-input response i(t)...
Assuming that i(0) = 10 A, plot the zero-input response i(t) in the circuit of Fig. D.30 for 0 < t < 4 s using PSpice.
The circuit is the same as the one for Example 7.3, where we obtained the solution as
i(t)=10 e^{(-2 / 3) t}For PSpice analysis, the schematic is in Fig. D.31, where the current-controlled source H1 has been wired to agree with the circuit in Fig. D.30. The voltage of H1 is 3 times the current through inductor L1. Therefore, for H1, we set GAIN = 3 and for the inductor L1, we set the initial condition IC = 10. Using the Analysis/Setup/Transient dialog box, we set Print Step = 0.25s and Final Time = 4s. After simulating the circuit, the output is taken as the inductor current i(t), which is plotted in Fig. D.32.
Related Answered Questions
Question: D.6
Verified Answer:
Recall that 20 sin 2t = 20 cos (2t − 90°) and that...
Question: D.7
Verified Answer:
The schematic is shown in Fig. D.45. We assume tha...
Question: D.5
Verified Answer:
We draw the circuit and set the attributes as show...
Question: D.3
Verified Answer:
We draw the schematic of the circuit and set the a...
Question: D.2
Verified Answer:
We use Schematics to create the circuit. After sav...
Question: D.1
Verified Answer:
We will follow the three steps mentioned above. We...