Holooly Plus Logo
Holooly Plus Logo

Question 7.8: Construct a response spectrum for the symmetric triangle sho......

Construct a response spectrum for the symmetric triangle shown in Fig. 7.24a. Plot DMF vs td/T in the integral 0 ≤ td/T ≤ 10. Assume ρ = 0, td = 2 s.

A MATLAB program for drawing response spectrum is given in Chapter 6.

The response curve is shown in Fig. 7.24b.

التقاط
Step-by-Step
The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.
Report Answer

A family of response spectrum curves or response spectra can be produced for a specific load case by evaluating response maxima for several values of damping ρ. Hence maximum response of a linear SDOF to a specified time depends on \omega_{ n } and ρ.

Related Answered Questions

Question: 7.4

The shear frame shown in Fig. 7.9a is subjected to the exponential pulse force shown in Fig 7.9b. Write a computer program for the average acceleration method (incremental formulation) to evaluate the dynamic response of the frame. Plot the time histories for displacement u(t), velocity u(t ) and ...

Verified Answer:

I for ISWB 600 @1337 = 106198.5e^4mm^4[/lat...
Question: 7.5

A single storey shear frame shown in Fig 7.15a is subjected to El Centro ground excitation as shown in Fig. 7.15c. The simplified model is shown in Fig. 7.15b. The rigid girders support a load of 25.57 kN/m. Assuming a damping factor ρ = 0.02 for steel frame, E = 200 GPa. Write a computer program ...

Verified Answer:

\begin{aligned}& \omega_n=9.53  rad / s...
Question: 7.6

Solve Example 7.4 by Wilson’s proposed procedure with different data as shown below. m = 0.065 k = 7.738 ρ = 0.07 F0 = 10 ...

Verified Answer:

The equation of motion is written as m \ddo...
Question: 7.1

The water tank shown in Fig.7. 2a is subjected to the blast loading illustrated in Fig 7.2b. Write a computer program in MATLAB to numerically evaluate the dynamic response of the tower by interpolation of the excitation. Plot the displacement u(t) and velocity u(t ) response in time interval ...

Verified Answer:

K = 40913 kN/m = 40931 × 10³ N/m m = 445.5 × 1000/...
Question: 7.9

A water tank shown in Fig. 7.25a is subjected to a dynamic load shown in Fig. 7.25b. Evaluate numerically using the Duhamel integral for the response. ...

Verified Answer:

mass = 400 × 1000/9.81 = 40774.7 kg k = 35000 × 10...
Question: 7.2

A single story shear frame shown in Fig. 7.4a is subjected to arbitrary excitation force specified in Fig. 7.4b. The rigid girder supports a load of 25.57 kN/m.Assume the columns bend about their major axis and neglect their mass, and assuming damping factor of ρ = 0.02 for steel structures, E ...

Verified Answer:

(a) The total load on the beam = 25.57 × 10 = 255....
Question: 7.7

A shear frame structure shown in Fig. 7.4a is subjected to time varying force shown in Fig. 7.21. Evaluate the elastic and elasto-plastic response of the structure by the Newmark method without equilibrium iterations. ...

Verified Answer:

k = 1897251 N/m m = 43848 kg c = 34605.4 Ns/m [lat...
Question: 7.3

A steel water tank shown in Fig. 7.6a is analysed as an SDOF system having a mass on top of cantilever which acts as a spring and dashpot for damping. A blast load of P(t) is applied as shown in Fig. 7.6b. The values of the force are given in Table 7.6. Draw displacement, velocity and acceleration ...

Verified Answer:

Given W = 133.5 kN \begin{aligned}& \te...