Question 16.7: Choose an appropriate interval of expansion for the signal d...

Introduction to Circuit Analysis and Design

Choose an appropriate interval of expansion for the signal defined graphically by Fig. 16.3.

16-3

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 16.8

Find the peak amplitudes of the first three non-zero terms in the amplitude phase Fourier series for a symmetric triangular wave having peak amplitude x0=10 V and period T=2 ms . ...

Verified Answer:

From Table 16.2 , the Fourier coefficients for a ...

Question: 16.10

A certain triangular pulse train has period T=4 ms and pulse duration τ=1 ms . How many terms are needed in a finite Fourier series to account for at least 99.9 % of the power the pulse train would cause to be dissipated in a resistive load? ...

Verified Answer:

The Fourier coefficients of a triangular pulse tra...

Question: 16.6

Obtain the Fourier coefficients for the periodic signal (rectangular pulse train) defined in Fig. 16.1. ...

Verified Answer:

In (16.22),

t_0

is arbitrary for ...

Question: 16.5

The Fourier coefficients for a certain Fourier series are given by Xk=1/1+jk V;k=0,±1,±2,⋯. Obtain the quadrature form of the series. ...

Verified Answer:

We can write the expression above for the Fourier ...

Question: 16.3

Obtain the Fourier coefficients for a Fourier series expressed in amplitude phase form as x(t)=5+10cos(2πf0t)+5cos(4πf0t+π/4)V ...

Verified Answer:

From (16.7),

X_k= \begin{cases}\frac{A_k}{...

Question: 16.4

The Fourier coefficients for a certain Fourier series are given by Xk=1/1+jk V;k=0,±1,±2,⋯ Obtain expressions for the peak amplitudes and relative phases of the amplitude-phase form of the series. ...

Verified Answer:

From (16.10),

A_k=2\left|X_k\right|, \qua...

Question: 16.12

In Fig. 16.11, the op amp is ideal, C=220pF,R2=100kΩ, and νS=A[cos(2πf0t)+cos(10πf0t)+cos(100πf0t)] with A=10mV and f0=50kHz. (a) Express the excitation as an exponential Fourier series and obtain the Fourier coefficients for the load voltage νL. (b) Express the load voltage in amplitude-phase ...

Verified Answer:

(a) The fundamental frequency is

f_0[/latex...

Question: 16.14

Obtain and plot the twosided amplitude and phase spectra for the rectangular pulse train of Example 16.13 k=0,±1,±2,⋯,±8 . ...

Verified Answer:

The Fourier coefficients are given in Table 16.2. ...

Question: 16.13

Obtain and plot the first 12 values of the amplitude spectrum and the phase spectrum for a symmetric rectangular pulse train (see Table 16.2) having pulse duration τ=250μs , period T=1 ms and amplitude V0=500mV ...

Verified Answer:

From Table 16.2, the Fourier coefficients for the ...

Question: 16.11

Refer to Fig. 16.9, where the op amp is ideal and the excitation \nu_SνS is a halfwave rectified 800kHz sinusoid having peak amplitude x0=200mV. (a) Obtain an expression for the Fourier coefficients for the response νL. (b) Calculate the peak amplitudes of the first four non-zero terms in the ...

Verified Answer:

(a) From Table 16.2, the Fourier coefficients for ...