Question 2.16: Determine the work done by the air which enters into an evac...

Engineering Thermodynamics

Determine the work done by the air which enters into an evacuated vessel from atmosphere when the valve is opened. The atmospheric pressure is 1.013 bar and 1.5 m³ of air at atmospheric condition enters into the vessel.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 2.9

Estimate the mass of a piston that can be supported by a gas entrapped under the piston in a 200 mm diameter vertical cylinder when a manometer indicates a difference of 117 mm of Hg column for the gas pressure. ...

Verified Answer:

Refer Fig. 2.28. Let m = mass of the piston, kg. p...

Question: 2.22

A cylinder contains 1 kg of a certain fluid at an initial pressure of 20 bar. The fluid is allowed to expand reversibly behind a piston according to a law pV² = constant until the volume is doubled. The fluid is then cooled reversibly at constant pressure until the piston regains its original ...

Verified Answer:

Refer Fig. 2.39. Mass of fluid, m = 1 kg

p_...

Question: 2.15

Gas from a cylinder of compressed helium is used to inflate an inelastic flexible balloon, originally folded completely flat, to a volume 0.6 m³. If the barometer reads 760 mm Hg, what is the amount of work done upon the atmosphere by the balloon ? Sketch the system before and after the process. ...

Verified Answer:

Refer Fig. 2.34. The firm line

B_1

...

Question: 2.21

A fluid at a pressure of 3 bar, and with specific volume of 0.18 m³/kg, contained in a cylinder behind a piston exapnds reversibly to a pressure of 0.6 bar according to a law, p = C/v² where C is a constant. Calculate the work done by the fluid on the piston. ...

Verified Answer:

Refer Fig. 2.38.

p_1=3 \text { bar }=3 \tim...

Question: 2.20

To a closed system 150 kJ of work is supplied. If the initial volume is 0.6 m³ and pressure of the system changes as p = 8 – 4V, where p is in bar and V is in m³, determine the final volume and pressure of the system. ...

Verified Answer:

Amount of work supplied to a closed system = 150 k...

Question: 2.19

The properties of a closed system change following the relation between pressure and volume as pV = 3.0 where p is in bar V is in m³. Calculate the work done when the pressure increases from 1.5 bar to 7.5 bar. ...

Verified Answer:

Initial pressure,

p_1=1.5

bar Final...

Question: 2.18

A diesel engine piston which has an area of 45 cm² moves 5 cm during part of suction stroke. 300 cm³ of fresh air is drawn in from the atmosphere. The pressure in the cylinder during suction stroke is 0.9 × 10^5 N/m² and the atmospheric pressure is 1.013 × 10^5 N/m². The difference between the ...

Verified Answer:

Area of diesel engine piston = 45

cm ^2=45 ...

Question: 2.17

A piston and cylinder machine containing a fluid system has a stirring device as shown in Fig. 2.36. The piston is frictionless, and it is held down against the fluid due to atmospheric pressure of 101.3 kPa. The stirring device is turned 9500 revolutions with an average torque against the fluid of ...

Verified Answer:

Refer Fig. 2.36. Work done by the stirring device ...

Question: 2.14

Comment whether the following quantities can be called as properties or not : (i) ∫ pdV , (ii) ∫ Vdp ,and (iii) ∫ pdV + ∫ Vdp. ...

Verified Answer:

(i)

\int p d V

: p is a function of...

Question: 2.13

A thermocouple with test junction at t°C on gas thermometer scale and reference junction at ice point gives the e.m.f. as e = 0.20 t – 5 × 10^–4t² mV. The millivoltmeter is calibrated at ice and steam points. What will be the reading on this thermometer where the gas thermometer reads 70°C ? ...

Verified Answer:

e=0.20 t-5 \times 10^{-4} t^2

mV …(...