Question 8.12: If the values for reduced pressure and compressibility facto...

Engineering Thermodynamics

If the values for reduced pressure and compressibility factor for ethylene are 20 and 1.25 respectively, compute the temperature.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 8.6

An ideal engine operates on the Carnot cycle using a perfects gas as the working fluid. The ratio of the greatest to the least volume is fixed and is x : 1, the lower temperature of the cycle is also fixed, but the volume compression ratio ‘r’ of the reversible adiabatic compression is variable. ...

Verified Answer:

Refer Fig. 1.

\frac{V_{3}}{V_{1}} = x ...

Question: 8.5

An inventor claims that a new heat cycle will develop 0.4 kW for a heat addition of 32.5 kJ/min. The temperature of heat source is 1990 K and that of sink is 850 K. Is his claim possible ? ...

Verified Answer:

Temperature of heat source,

T_{1}[...

Question: 8.7

CO2 flows at a pressure of 10 bar and 180°C into a turbine, located in a chemical plant, and there it expands reversibly and adibatically to a final pressure of 1.05 bar. Calculate the final specific volume, temperature and increase in entropy. Neglect changes in velocity and elevation. If the mass ...

Verified Answer:

At entry to turbine At exit of turbine P...

Question: 8.16

Determine the value of compressibility factor at critical point (Zcp) for the Van der Waals’ gas. ...

Verified Answer:

Refer Fig. 8.13. From the isotherms plotted on p-v...

Question: 8.15

A spherical shaped balloon of 12 m diameter contains H2 at 30°C and 1.21 bar. Find the mass of H2 in the balloon using real gas equation. ...

Verified Answer:

Diameter of spherical balloon = 12 m ∴ Volume, [la...

Question: 8.14

What should be the temperature of 1.3 kg of CO2 gas in a container at a pressure of 200 bar to behave as an ideal ? ...

Verified Answer:

Pressure, p = 200 bar Temperature, T = ? For [late...

Question: 8.13

Calculate the density of N2 at 260 bar and 15°C by using the compressibility chart. ...

Verified Answer:

Pressure, p = 260 bar Temperature, T = 15 + 273 = ...

Question: 8.11

One kg-mol of oxygen undergoes a reversible non-flow isothermal compression and the volume decreases from 0.2 m³/kg to 0.08 m³/kg and the initial temperature is 60°C. If the gas obeys Van der Waals’ equation find : (i) The work done during the process (ii) The final pressure. ...

Verified Answer:

The Van der Waals’ equation is written as

\...

Question: 8.10

container of 3 m³ capacity contains 10 kg of CO2 at 27°C. Estimate the pressure exerted by CO2 by using : (i) Perfect gas equation (ii) Van der Waals’ equation (iii) Beattie Bridgeman equation. ...

Verified Answer:

Capacity of the container, V = 3 m³ Mass of [latex...

Question: 8.9

One kg of CO2 has a volume of 1 m³ at 100°C. Compute the pressure by (i) Van der Waals’ equation (ii) Perfect gas equation. ...

Verified Answer:

(i) Using Van der Waals’ equation : Molar specific...