Question D.3: Plot I1 and I2 if the dc voltage source in Fig. D.20 is swep...

We draw the schematic of the circuit and set the attributes as shown in Fig. D.21. Notice how the voltage-controlled voltage source E1 is connected. After completing the schematic, we select Analysis/Setup and input the start, end, and increment values as 2, 10, and 0.5, respectively. By selecting Analysis/Simulate, we bring up the Probe Menu. We select Trace/Add and click I(R1) and −I(R3) to be displayed. (The negative sign is needed to make the current through R3 positive.) Figure D.22 shows the result.