Stability of a plank on a log A uniform thin rigid plank is placed on top of a rough circular log and can roll without slipping. Show that the equilibrium position, in which the plank rests symmetrically on top of the log, is stable.

Question

Stability of a plank on a log

A uniform thin rigid plank is placed on top of a rough circular log and can roll without slipping. Show that the equilibrium position, in which the plank rests symmetrically on top of the log, is stable.

Accepted Answer

Suppose that the plank is disturbed from its equilibrium position and is tilted by an angle θ as shown in Figure 9.6. The plank is known to roll on the log, which means that the distance GC from the centre G of the plank to the contact point C must always be equal to the arc length of the log that has been traversed. If the radius of the log is a, then this arc length is aθ.

We are not yet able to calculate the kinetic energy of the plank in terms of the coordinate θ. This is done in the next section. However, we do not need it to investigate stability.

The only contribution to the potential energy of the plank comes from uniform gravity. This is given by V = MgZ, where Z is the vertical displacement of the centre of mass G of the plank. Elementary trigonometry (see Figure 9.6) shows that Z = a cos θ + aθ sin θ − a, so that

[latex] V=M g a(\cos heta+ heta \sin heta-1) [/latex]

We must now show that the constraint forces do no work. The rate of working of the constraint force R that the log exerts on the plank is [latex] R \cdot v ^{C}, ext { where } v ^{C} [/latex] is the velocity of the particle C of the plank that is instantaneously in contact with the log.
But, since the plank rolls on the log, [latex] v ^{C}= 0 [/latex] so that the rate of working of R is zero.
Also, the internal constraint forces that enforce the rigidity of the plank do no work in total. Hence, the constraint forces do no work in total.
Energy conservation therefore applies in the form

[latex] T+M g a(\cos heta+ heta \sin heta-1)=E.[/latex]

It follows that the equilibrium position (with the plank on top of the log) will be stable if V has a minimum at θ = 0. Now V′ = Mgaθ cos θ and [latex]V^{\prime \prime}[/latex] = Mga(cos θ −θ sin θ ) so that, when θ = 0, V′ = 0 and [latex]V^{\prime \prime}=1 .[/latex]. Hence V has a minimum at θ = 0 and so the equilibrium position is stable.

Question 9.7: Stability of a plank on a log A uniform thin rigid plank is ...

Related Answered Questions

Internal energy of three charged particles Three particles P1, P2, P3 carry electric charges e1, e2, e3 respectively. Find the internal potential energy Ψ. ...

Verified Answer:

Moment of inertia of a hoop Find the moment of inertia of a uniform hoop of mass M and radius a about its axis of rotational symmetry. ...

Verified Answer:

Cylinder rolling down a plane A uniform hollow circular cylinder is rolling down a rough plane inclined at an angle α to the horizontal. Find the acceleration of the cylinder. ...

Verified Answer:

The sliding ladder A uniform ladder of length 2a is supported by a smooth horizontal floor and leans against a smooth vertical wall.* The ladder is released from rest in a position making an angle of 60° with the downward vertical. Find the energy conservation equation for the ladder. ...

Verified Answer:

Kinetic energy of a rolling wheel Find the kinetic energy of the rolling wheel shown in Figure 2.8. ...

Verified Answer:

Attwood’s machine Two blocks of masses m and 2m are connected by a light inextensible string which passes over a uniform circular pulley of radius a and mass 4m. Find the upward acceleration of the mass m. ...

Verified Answer:

Rotational kinetic energy of the Earth Estimate the rotational kinetic energy of the Earth, regarded as a rigid uniform sphere rotating about a fixed axis through its centre. ...

Verified Answer:

Displacement at time t Find the displacement of the rope at time t. ...

Verified Answer:

Rope sliding off a table A uniform inextensible rope of mass M and length a is released from rest hanging over the edge of a smooth horizontal table, as shown in Figure 9.5. Find the speed of the rope when it has the displacement x shown. ...

Verified Answer:

When do the sliders collide? Find the time that elapses before the sliders collide. ...

Verified Answer: