Holooly Plus Logo
Holooly Plus Logo

Question 2.13: A full-wave rectifier delivers 50 W to a load of 200 X. If t...

A full-wave rectifier delivers 50 W to a load of 200\Omega . If the ripple factor is 1%, calculate the ac ripple voltage across the load.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

A π filter having C = C1 = C2 = 10 μF and L = 10 H operates after a full-wave rectifier. The input voltage is V = 300 Sin(2π × 50t) and the load resistance is RL = 10 kΩ. Find the ripple factor (Γ) assuming the output voltage has only second harmonic. What is the ripple factor (Γ) if inductor is

Verified Answer:
Γ = \sqrt{2}\frac{ X_{c1} × X_{c2}}{R_{L}X_...

Calculate the minimum value of capacitance in use in a capacitor filter connected to a full-wave rectifier operating at a standard aircraft power frequency of 100 Hz, if the maximum ripple factor allowed is 10% for a load of 500 X.

Verified Answer:
\Gamma=\frac{1}{4\sqrt{3}fCR_L} [la...

Calculate the ripple factor, when a full-wave rectifier is used as LC filter with L = 20 H and C = 15 lF. Assume the applied voltage is V=300 sin(2p*50)t.

Verified Answer:
For LC filter, if C is in \mu F ran...

Calculate the value of inductances to be used in the inductor filter connected to a full-wave rectifier operating at 50 Hz to provide a dc output with 5% ripple for a 100 X load

Verified Answer:
The ripple factor for inductor filter is \G...

A 230 V, 50 Hz voltage is applied to the primary of a 4: 1 stepdown transformer used in a bridge rectifier having a load resistance of 1000 X. Assuming the diode to be ideal, calculate (a) dc output voltage, (b) dc power delivered to the load, (c) PIV and (d) output ripple frequency.

Verified Answer:
(a) RMS value of transformer secondary voltage [la...

A diode with internal resistance rf=20 X in half-wave rectifier, is applied V = 50 sin xt and RL =800 X. Calculate (a) Im, Idc and Irms, (b) ac power input and dc power output, (c) dc output voltages and (d) efficiency of rectifier.

Verified Answer:
V=50\sin\omega t V_m=50[/lat...

A half-wave rectifier is shown in Fig.2.20. Find maximum and average values of power delivered to the load. Assume RL=200 X(N1:N2=2:1).

Verified Answer:
N_1:N_2=2:1 V_{in}=V_1=230 V...

A half-wave rectifier has a resistive load RL=1000 X, with an ac voltage 325 V (peak value) and the diode has a forward resistance of 100 X. Calculate (a) peak average and RMS value of current, (b) dc output power, (c) ac input power and (d) efficiency of the rectifier

Verified Answer:
(a) Peak value of current, I_{m} =\frac{V_m...

For the circuit shown in Fig. 2.15, find (i) the output voltage,(ii) the voltage drop across the series resistance and (iii) the current through Zener diode

Verified Answer:
Regarding the given figure, (a) Output voltage= [l...

A Zener diode shunt regulator is shown in Fig. 2.14. Determine (i) the load voltage, (ii) voltage drop across RS and (iii) current through the Zener diode.

Verified Answer:
Given that V_S=30V, V_Z=12V[...