Holooly Plus Logo
Holooly Plus Logo

Question 23.2: Calculate the cutoff frequency for the RC high-pass filter i...

Calculate the cutoff frequency for the RC high-pass filter in Fig. 23-12a.

The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

Use Formula (23-6):

f_c=\frac{1}{2\pi RC}                        (23-6)

=\frac{1}{2\times \pi \times 1.5k\Omega \times 0.01\mu F}

=10.61 KHz

 

Related Answered Questions

In Fig. 23-15, calculate the attenuation, in decibels, at the following frequencies: (a) 0 Hz; (b) 1.592 kHz; (c) 15.92 kHz. (Assume that Vin = 10 Vp-p at all frequencies.)

Verified Answer:
a. At 0 Hz,  V_{out} = V_{in} = 10 V{p-p} [...

In Fig. 23-9a, calculate (a) the cutoff frequency fc; (b) Vout at fc; (c) θ at fc. (Assume Vin = 10 Vp-p for all frequencies.)

Verified Answer:
a. To calculate f_c , use Formula (...

From the graph in Fig. 23-17b, what is the attenuation in decibels at (a) 100 Hz; (b) 10 kHz; (c) 50 kHz?

Verified Answer:
a.  At f =100 Hz, N_{dB} = 0 dB, as...

The input power to a filter is 100 mW, and the output power is 5 mW. Calculate the attenuation, in decibels, offered by the filter.

Verified Answer:
N_{dB}=10 \log \frac{P_{out}}{P_{in}}[/late...

A certain amplifier has an input power of 1 W and an output power of 100 W. Calculate the dB power gain of the amplifier.

Verified Answer:
Use Formula (23-11): N_{dB}=10 \log \frac{P...

Calculate the notch frequency fN in Fig. 23-14a if R1= 1 kΩ and C1 = 0.01 μF. Also, calculate the required values for 2R1 and 2C1 in the low-pass filter.

Verified Answer:
Use Formula (23-10): f_N=\frac{1}{4\pi R_1C...