Holooly Plus Logo
Holooly Plus Logo

Question 9.10: Construct a table showing step size versus number of poles f...

Construct a table showing step size versus number of poles for three-phase and four-phase stepper motors.

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.
The Blue Check Mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Subscribe

Already have an account?

Login

Related Answered Questions

What type of motor would you select to perform each of the following jobs? Why? (a) Vacuum cleaner (b) Refrigerator (c) Air conditioner compressor (d) Air conditioner fan (e) Variable-speed sewing machine (f) Clock (g) Electric drill

Verified Answer:
(a) Universal motor—for its high torque (b) Capaci...

A 120-V 1/4-hp 60-Hz four-pole split-phase induction motor has the following impedances: R1 = 2.00 Ω R2 = 2.8 Ω X1 = 2.56 Ω X2 = 2.56 Ω XM = 60.5 Ω At a slip of 0.05, the motor’s rotational losses are 51 W. The rotational losses may be assumed constant over the normal operating range of the motor.

Verified Answer:
The equivalent circuit of the motor is shown below...

Suppose that the motor in Problem 9-1 is started and the auxiliary winding fails open while the rotor is accelerating through 400 r/min. How much induced torque will the motor be able to produce on its main winding alone? Assuming that the rotational losses are still 51 W, will this motor continue

Verified Answer:
At a speed of 400 r/min, the slip is s=\fra...

Use MATLAB to calculate and plot the torque-speed characteristic of the motor in Problem 9-1, ignoring the starting winding.

Verified Answer:
This problem is best solved with MATLAB, since it ...

A 220-V 1.5-hp 50-Hz six-pole capacitor-start induction motor has the following main-winding impedances: R1 = 1.3 Ω R2 = 1.73 Ω XM = 105 Ω X1 = 2.01 Ω X2 = 2.01 Ω At a slip of 0.05, the motor’s rotational losses are 291 W. The rotational losses may be assumed constant over the normal operating

Verified Answer:
The equivalent circuit of the motor is shown below...

Find the induced torque in the motor in Problem 9-5 if it is operating at 5 percent slip and its terminal voltage is (a) 190 V, (b) 208 V, (c) 230 V. 

Verified Answer:
The impedances Z_F \text { and } Z_B[/latex...